Get the Pass

Alabama permit test: signals and pavement markings

A steady circular red light means stop and wait for green. After stopping you may turn right on red, or turn left onto a one-way street that runs right to left, unless a sign forbids it. You must yield to traffic and pedestrians. A steady yellow means clear the intersection, and you must not enter when red appears. A flashing red signal means the same as a STOP sign. If signals are not working, treat the intersection as a four-way stop. A steady red X over a lane means do not drive in that lane. Yellow centerlines separate opposite traffic on two-lane roads. A solid yellow line on your side means no passing, and two solid yellow lines bar passing for both directions. Broken white lines divide same-direction lanes and may be crossed. A solid white edge line may be crossed only to reach or leave the shoulder. A double solid white line bars crossing between same-direction lanes. White crosswalk lines mean you must stop for pedestrians when no signal controls the crossing.

Handbook: Chapter 5: Pavement Markings and Traffic Signals; Chapter 6: Stopping

7 practice questions

1. A solid yellow line is on your side of the center line on a two-lane road. What does it mean?
  1. You may pass if no car is coming
  2. You may pass only a slow vehicle
  3. You may not pass
  4. You may pass only during daylight
Show answer

Answer: C. You may not pass

If a solid yellow line is on your side of the centerline, you may not pass. A double solid yellow line bans passing for traffic in both directions.

Handbook: Chapter 5: Pavement Markings – Centerlines

2. What do broken white lines on a road with two or more lanes in your direction mean?
  1. They divide traffic moving in opposite directions on the road
  2. They divide lanes of traffic moving the same way
  3. They mark a no passing zone on a two-lane road
  4. They mean that you must never change lanes here
Show answer

Answer: B. They divide lanes of traffic moving the same way

When a road has two or more lanes in one direction, broken white lines divide the lanes. You may cross them when passing or changing lanes safely. Yellow lines separate opposing traffic.

Handbook: Chapter 5: Pavement Markings – Lane dividers

3. You come to an intersection with a flashing red signal. What does it mean?
  1. The same as a STOP sign: stop, then go when it is safe
  2. Slow down and go through with care
  3. Stop only if other cars are coming
  4. Stop and wait for the light to turn green
Show answer

Answer: A. The same as a STOP sign: stop, then go when it is safe

A flashing red signal means the same as a STOP sign. Come to a complete stop, then proceed when the way is clear. You do not wait for a green light.

Handbook: Chapter 6: Traffic Laws – Stopping

4. The traffic signals at an intersection are not working. How must you treat the intersection?
  1. As a yield intersection
  2. As if you have the right of way if you arrive first from the main road
  3. As a free-flow intersection where you may go at normal speed
  4. As a four-way stop
Show answer

Answer: D. As a four-way stop

If the traffic light is inoperative, treat the intersection as you would a four-way stop. Stop, then go in the order of arrival.

Handbook: Chapter 6: Traffic Laws – Stopping

5. A lane has a steady red X on a signal above it. What must you do?
  1. Drive in that lane with caution
  2. Use the lane only to pass
  3. Not drive in that lane
  4. Stop in the lane and wait for green
Show answer

Answer: C. Not drive in that lane

A steady red X over a lane means you may not drive in that lane. A steady yellow X means use the lane with caution, and a green arrow means you may use it.

Handbook: Chapter 5: Lane Use Control Signals

6. You approach a signal that shows a steady circular yellow light. What does it mean?
  1. Speed up so you pass before the light turns red
  2. Stop at once, even if you are already in the intersection
  3. Clear the intersection, because red is about to appear
  4. Yield to cross traffic, then continue straight ahead
Show answer

Answer: C. Clear the intersection, because red is about to appear

A steady yellow follows green and tells you to clear the intersection. You must not enter after the red signal comes on.

Handbook: Chapter 5: Signs, Signals and Road Markings – Traffic Signals

7. What does a double solid white line between two lanes going the same direction mean?
  1. You may cross the lines only to pass a slow vehicle
  2. Crossing the lines is prohibited
  3. The lane on your left is for left turns only
  4. Crossing is allowed if you signal first
Show answer

Answer: B. Crossing the lines is prohibited

A double solid white line separates lanes of same-direction traffic and bars crossing. A single solid white line only discourages crossing.

Handbook: Chapter 5: Signs, Signals and Road Markings – Pavement Markings