Arizona permit test: signals and pavement markings
A steady green means go if the road is clear, and you must yield to anyone still in the intersection. A steady yellow means the light is about to turn red. Stop if you have not entered. A red light means a complete stop before the intersection, stop line or crosswalk. Where no sign bans it, you may turn right on red after a full stop when traffic and people are clear. A flashing red light works like a stop sign. A flashing yellow means slow down and use caution. A red arrow bans the turn. A flashing yellow arrow means turn with care and yield to oncoming vehicles and pedestrians. A dark signal is treated as a four-way stop. Yellow center lines separate traffic going opposite ways. A solid yellow line on your side means no passing. Double solid yellow lines mean no passing either way, and you cross only to turn left. White lines separate lanes going the same way. A red curb means no stopping, standing or parking. White means passengers only. Yellow means loading only. A red light conviction means mandatory Traffic Survival School.
Handbook: Section 3: Roadway and Vehicle Knowledge – Signal Lights and Pavement Markings
7 practice questions
- Stop completely, then go on with care when the road is clear
- Slow down and keep going if you see no traffic either way
- Treat it as a yield sign and give way to cross traffic only
- The signal is broken, so the cross street may go first
Show answer
Answer: A. Stop completely, then go on with care when the road is clear
A flashing red light has the same meaning as a stop sign. You must make a full stop and then go on with care when the roadway is clear.
Handbook: Section 3: Roadway and Vehicle Knowledge – Signal Lights: Flashing Red Light
- Stop and wait for a green arrow before you turn
- Turn first, because oncoming traffic must yield to the arrow
- Do not turn, because a flashing arrow means turns are banned
- Slow down and turn with care, yielding to oncoming vehicles and pedestrians
Show answer
Answer: D. Slow down and turn with care, yielding to oncoming vehicles and pedestrians
A flashing yellow arrow permits the turn, but you must yield. Slow down, check for oncoming vehicles and pedestrians, and turn only when it is safe.
Handbook: Section 3: Roadway and Vehicle Knowledge – Signal Lights: Flashing Yellow Arrow
- Come to a safe stop
- Speed up to clear the intersection before the light turns red
- Keep your speed, because yellow means go if the road is clear
- Sound your horn and then keep going through
Show answer
Answer: A. Come to a safe stop
A steady yellow light warns that the light is about to turn red. If you have not yet entered the intersection, stop safely. Speeding up to beat the light is illegal and can cause a crash.
Handbook: Section 3: Roadway and Vehicle Knowledge – Signal Lights: Yellow
- Wait for the green light, because right turns on red are not allowed
- Slow down and turn without a stop if no cars are close
- Stop fully before the crosswalk, yield to people and traffic, then turn when clear
- Stop, then turn at once, because pedestrians must wait for you
Show answer
Answer: C. Stop fully before the crosswalk, yield to people and traffic, then turn when clear
Where no sign bans it, you may turn right on red after a complete stop. Stop before the marked or unmarked crosswalk. Yield to pedestrians, bicyclists and other traffic before you turn.
Handbook: Section 3: Roadway and Vehicle Knowledge – Turning: Right on Red
- Yes, if the road ahead is clear
- Yes, if you signal first and stay under the speed limit
- Yes, but only if the vehicle ahead is moving slowly
- No, you may not pass
Show answer
Answer: D. No, you may not pass
A broken yellow line next to a solid yellow line allows passing only for the driver on the broken-line side. If the solid line is on your side, you may not pass.
Handbook: Section 3: Roadway and Vehicle Knowledge – Pavement Markings: Solid and Broken Yellow Lines
- You may stop only long enough to load or unload
- You may stop only to pick up or drop off passengers
- You may not stop, stand or park there
- You may park there if you stay with your vehicle
Show answer
Answer: C. You may not stop, stand or park there
A red curb means no stopping, standing or parking. A yellow curb allows a stop only to load or unload. A white curb allows a stop only to pick up or drop off passengers.
Handbook: Section 3: Roadway and Vehicle Knowledge – Pavement Markings: Painted Curbs
- You may pass if the road ahead is clear of traffic
- No passing either way, cross only to turn left
- You may never cross them, even to turn left
- You may cross them only to pass slow vehicles
Show answer
Answer: B. No passing either way, cross only to turn left
Double solid yellow lines mean no passing in either direction. You may not cross them unless you are turning left.
Handbook: Section 3: Roadway and Vehicle Knowledge – Pavement Markings: Double Yellow Lines