Get the Pass

Arkansas permit test: signals and pavement markings

A green light lets you go when no opposing traffic remains in the intersection. A steady yellow light means the signal is about to turn red, so stop if it is safe. A red light means stop until it turns green and it is safe. A flashing red light works like a stop sign. A flashing yellow light means slow down and proceed with caution. A steady red arrow means you may not turn that way. A flashing yellow arrow lets you turn left, but you must yield to oncoming traffic and pedestrians. A green arrow gives a protected turn, and opposing traffic must stop. You may turn right on red after a complete stop and a check for traffic and pedestrians, unless a sign bans it. A solid white line marks the road edge. A dashed white line separates lanes going the same way. A broken yellow line lets you pass when the way is clear. A solid double yellow line bans passing in both directions. At a railroad, flashing red lights mean a train is present, even if no train appears. Never go around lowered gates.

Handbook: Chapter 2: Traffic Control Signals; Chapter 3: Lanes of Traffic

8 practice questions

1. What does a flashing red traffic light mean?
  1. Slow down and go through the intersection with caution
  2. The light is about to turn green
  3. Stop only if cars are coming
  4. Stop, then go only when it is safe
Show answer

Answer: D. Stop, then go only when it is safe

A flashing red light is the same as a stop sign. You must come to a complete stop and proceed only when it is safe.

Handbook: Chapter 2: Traffic Control Signals – Flashing Lights

2. What does a flashing yellow arrow for a left turn mean?
  1. Oncoming traffic must stop and wait for you to turn
  2. You may turn left but must yield to oncoming traffic and pedestrians
  3. You must stop and wait for a green arrow
  4. You may not turn left
Show answer

Answer: B. You may turn left but must yield to oncoming traffic and pedestrians

A flashing yellow arrow permits left turns, but you must yield to oncoming traffic and pedestrians. A solid green arrow is the signal that stops opposing traffic.

Handbook: Chapter 2: Traffic Control Signals – Lighted Arrows

3. You want to turn left, and your lane has a steady red left arrow. What does the arrow mean?
  1. You may turn left after you yield to every car and walker
  2. You may turn left after a full stop
  3. You may not turn left until the signal changes
  4. You may turn left if no cars are coming
Show answer

Answer: C. You may not turn left until the signal changes

A red arrow means you may not turn in the direction of the arrow. Drivers turning left must stop.

Handbook: Chapter 2: Traffic Control Signals – Lighted Arrows

4. You are on a two-lane road with a solid double yellow line in the center. What does it mean?
  1. Passing is prohibited for traffic in both directions
  2. You may pass if the road ahead is clear
  3. Only the driver in the left lane may pass the other car
  4. It marks a lane for turning only
Show answer

Answer: A. Passing is prohibited for traffic in both directions

A solid double yellow line separates traffic moving in opposite directions and means passing is prohibited for vehicles in either direction.

Handbook: Chapter 3: General Driving – Lanes of Traffic – Yellow Lane Markings

5. You are at a railroad crossing. The red lights are flashing, but you see no train. What should you do?
  1. Stay stopped and do not cross
  2. Cross quickly if you see no train
  3. Cross if the gates are still up
  4. Go around the gates slowly
Show answer

Answer: A. Stay stopped and do not cross

When the red lights are flashing, a train is present. Even if the lights keep flashing and no train appears, you must not cross.

Handbook: Chapter 2: Railroad Crossing Signs – Gates and Lights

6. What does a steady yellow traffic light mean?
  1. Speed up and clear the intersection before it turns red
  2. The light will turn red, so stop if it is safe
  3. Stop only if other cars are already waiting
  4. Slow down and go on through with caution
Show answer

Answer: B. The light will turn red, so stop if it is safe

A steady yellow light means the signal is changing from green to red. You must stop if it is safe to do so. If you are already stopped, you may not proceed. A flashing yellow light is the one that means slow down and proceed with caution.

Handbook: Chapter 2: Traffic Control Signals – Lighted Traffic Signals

7. What does a broken yellow line between opposing lanes of traffic mean?
  1. Passing is prohibited in both directions
  2. It marks the outer edge of the road
  3. It separates lanes of traffic going the same direction
  4. You may cross it to pass if the way is clear
Show answer

Answer: D. You may cross it to pass if the way is clear

A broken yellow line separates traffic moving in opposite directions and lets you cross it to pass when no opposing traffic is coming. A solid double yellow line bans passing in both directions.

Handbook: Chapter 3: Lanes of Traffic – Yellow Lane Markings

8. What does a solid white line along the side of the road tell you?
  1. Where the outer edge of the road is
  2. You may cross it to pass on the right
  3. It separates lanes going opposite ways
  4. It marks a lane for turning vehicles only
Show answer

Answer: A. Where the outer edge of the road is

A solid white fog line marks the outer edge of the roadway. A dashed white line between lanes means you may cross it to change lanes when safe.

Handbook: Chapter 3: Lanes of Traffic – Fog Line and Lane Lines