California permit test: signals and pavement markings
A solid red light means stop. You may turn right on red after you stop at the limit line, if no NO TURN ON RED sign is posted and you yield to pedestrians. You may not turn at a red arrow. A flashing red light means stop, then go when it is safe. A solid yellow light means the light will turn red, so stop if you can do it safely. A flashing yellow light means slow down and proceed with caution. A flashing yellow arrow lets you turn, but you must yield to oncoming traffic first. A green arrow gives a protected turn. If a signal is out, treat the intersection as a stop sign on all four sides. On the road, a single solid yellow line marks the center of a two-way road. Double solid yellow lines mean do not pass. Two sets of double yellow lines two or more feet apart form a barrier you may not cross or turn across, except at designated openings. A broken yellow line next to your lane means you may pass when it is safe. Double solid white lines mean never change lanes across them.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals; Section 6: Navigating the Roads - Lane Markings
8 practice questions
- Stop, then go when it is safe
- Slow down and go through with caution without stopping
- The signal is about to turn green
- Stop and wait until the signal turns green
Show answer
Answer: A. Stop, then go when it is safe
A flashing red light means STOP. After you stop, you may go when it is safe. Slowing down without stopping is what a flashing yellow light allows, not a flashing red light.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Flashing Red Light)
- Your turn is protected and oncoming traffic is stopped
- You must stop and wait for a green arrow
- You may turn, but you must first yield to oncoming traffic
- The left-turn lane is closed
Show answer
Answer: C. You may turn, but you must first yield to oncoming traffic
A flashing yellow arrow means you can turn, but your turn is not protected from other traffic. Yield to oncoming traffic and proceed with caution. Only a green arrow gives you a protected turn.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Flashing Yellow Arrow)
- Drive through at normal speed if no one is coming
- Stop as if there were STOP signs in all directions, then go when it is safe
- Yield only to vehicles on your left
- Slow to 15 mph and drive through without stopping
Show answer
Answer: B. Stop as if there were STOP signs in all directions, then go when it is safe
When a traffic light is not working, stop as if the intersection had STOP signs in all directions. Then proceed cautiously when it is safe.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Traffic Light Not Working)
- You may cross them to pass slow vehicles
- You may cross them to make a U-turn at any point
- They mark a center left-turn lane
- They form a barrier that you must not drive over or turn across, except at designated openings
Show answer
Answer: D. They form a barrier that you must not drive over or turn across, except at designated openings
Two sets of solid double yellow lines spaced two or more feet apart are a barrier. Do not drive on or over them, or make a left turn or U-turn across them, except at designated openings. A center left-turn lane has a broken inner line and a solid outer line.
Handbook: Section 6: Navigating the Roads - Lane Markings (Double Solid Yellow Lines)
- Stop if you can do so safely
- Speed up to cross before it turns red
- Stop at once even if a vehicle is close behind you
- Continue at the same speed with no change
Show answer
Answer: A. Stop if you can do so safely
A solid yellow light means the light is about to turn red. Stop if you can do it safely. If you cannot stop safely, cross the intersection cautiously.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Solid Yellow Light)
- Turn right after a full stop if no one is coming
- Stay stopped until a green light or green arrow appears
- Turn right if no pedestrians are crossing
- Turn right slowly without stopping
Show answer
Answer: B. Stay stopped until a green light or green arrow appears
A red arrow means STOP, and you may not turn at it. The right turn on red rule applies only to a solid red light. Wait for a green light or green arrow.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Red Arrow)
- Only when a green arrow is also lit
- Never, unless a police officer waves you through
- After you stop at the limit line and yield to pedestrians, if no NO TURN ON RED sign is posted
- Without stopping, if no other vehicles are close
Show answer
Answer: C. After you stop at the limit line and yield to pedestrians, if no NO TURN ON RED sign is posted
A right turn on a solid red light is legal after a complete stop. Yield to pedestrians and other traffic first. A posted NO TURN ON RED sign forbids the turn.
Handbook: Section 7: Laws and Rules of the Road - Traffic Signals (Solid Red Light)
- You may change lanes if no one is behind you
- They separate two-way traffic
- They show where a lane ends and you must merge
- Never change lanes over them
Show answer
Answer: D. Never change lanes over them
Double solid white lines form a barrier between a regular lane and a preferential lane, such as a carpool lane. Wait for a single broken white line before you change lanes.
Handbook: Section 6: Navigating the Roads - Lane Markings (Double Solid White Lines)