Colorado permit test: signals and pavement markings
A steady red light means stop. After you stop and yield, you may turn right on red unless a sign forbids it. You may also turn left on red from a one-way street onto another one-way street. A steady yellow light means red is about to appear, so stop unless you are already in the intersection. A red arrow means stop and do not turn that way. A flashing yellow arrow lets you turn left if you yield to oncoming traffic and pedestrians. A flashing red light works like a stop sign. A flashing yellow light means slow down and use caution. If a signal is dark or broken, treat the intersection as a four-way stop. A broken yellow line lets you pass when it is safe. A solid yellow line on your side means no passing, except to pass a bicyclist with 3 feet of space when the oncoming lane is clear. A broken white line lets you change lanes. A solid white line means stay in your lane. A crosswalk can be marked or unmarked.
Handbook: Traffic Signals; Pavement Markings
8 practice questions
- The light is about to turn green
- Stop until the light turns steady green
- Slow down and drive with caution
- The same as a STOP sign: stop, then go when it is safe
Show answer
Answer: D. The same as a STOP sign: stop, then go when it is safe
A flashing red light works like a STOP sign. Come to a stop, yield to pedestrians and other traffic, and then go. A flashing yellow light is only a warning to slow down.
Handbook: Traffic Signals: Flashing red light
- As a four-way stop
- As if the light were flashing yellow
- As if the light were steady green
- As an uncontrolled intersection, with no need to stop
Show answer
Answer: A. As a four-way stop
If a signal is not operating or malfunctions, treat the intersection as a four-way stop. Each driver stops, and then goes in turn using the four-way stop rules.
Handbook: Traffic Signals
- Stop and wait for a solid green arrow before you turn at all
- Go straight only; you may not turn
- Turn with caution and yield to oncoming traffic and people walking
- Turn at once, because oncoming traffic has a red light
Show answer
Answer: C. Turn with caution and yield to oncoming traffic and people walking
A flashing yellow arrow means you may turn left but you must yield to oncoming traffic and pedestrians. Do not rush. The signal later changes to solid yellow and then red.
Handbook: Traffic Signals: Flashing yellow arrow
- Never; a red light always means you must wait for green
- Only when a green arrow is also shown
- After you slow down and see that no car is near
- After a full stop and yielding, if no sign forbids the turn
Show answer
Answer: D. After a full stop and yielding, if no sign forbids the turn
You must come to a full stop first. Then yield to pedestrians and other traffic. A sign can forbid the turn. You may also turn left on red from a one-way street onto another one-way street unless a sign forbids it.
Handbook: Traffic Signals: Steady red light
- No, you may not pass when the solid line is on your side
- Yes, if you finish passing before the broken line ends
- Yes, if you can see that the lane ahead is clear
- Yes, if you do not go over the speed limit
Show answer
Answer: A. No, you may not pass when the solid line is on your side
When the solid yellow line is on your side, you may not pass. You may pass only when the broken line is on your side and it is safe. One exception allows passing a bicyclist with at least 3 feet of space.
Handbook: Pavement Markings: Yellow lines
- Green is about to appear, so get ready to go when it is clear
- Speed up so that you can clear the intersection before red
- Red is about to appear; stop if not in the intersection
- Slow down and go through with caution, as at a flashing yellow
Show answer
Answer: C. Red is about to appear; stop if not in the intersection
A steady yellow light means a red light is about to appear. Stop unless you are already in the intersection. A flashing yellow light is the one that means slow down and proceed with caution.
Handbook: Traffic Signals: Steady yellow light
- You may change lanes whenever it is safe to do so
- Stay within your lane; it can also mark the shoulder
- Traffic on the other side of it moves the opposite way
- You may cross it to pass if the road ahead is clear
Show answer
Answer: B. Stay within your lane; it can also mark the shoulder
A solid white line separates lanes that go the same way and requires you to stay within your lane. It also marks the shoulder of the road. A broken white line is the one that lets you change lanes when it is safe.
Handbook: Pavement Markings: White lines
- Turn left after you yield to all oncoming traffic
- Stop, then turn left as soon as the road is clear
- Stop and do not turn left
- Slow down and turn left with caution
Show answer
Answer: C. Stop and do not turn left
A lighted red arrow means you must stop and may not turn in the direction it shows. A flashing yellow arrow is different: it lets you turn if you yield to oncoming traffic and pedestrians.
Handbook: Traffic Signals: Red arrow