Delaware permit test: signals and pavement markings
Learn four rules for lights: red means stop, yellow means prepare to stop, green means proceed with caution, and arrows apply only to the direction shown. A flashing red light means the same as a stop sign. A flashing yellow light means slow down and proceed with caution. If a signal is dark, slow down and be ready to yield. A steady yellow arrow means the green arrow has ended. A flashing red arrow allows a turn after a full stop. A flashing yellow arrow allows a turn after you yield to opposing traffic and pedestrians. Edge lines are solid white. A broken white line lets you change lanes, a solid white line discourages it, and double solid white lines prohibit it. Yellow lines separate opposing traffic. A broken yellow line on your side lets you pass. A solid yellow line on your side does not. Two solid yellow lines mean neither side may pass, but you may cross to turn into a driveway. Over a reversible lane, a green arrow means go, a red X means keep out, and a steady yellow X means leave the lane.
Handbook: Section Four: Rules of the Road - Understanding Traffic Signals and Pavement Markings
7 practice questions
- Slow down and keep going if no one is near
- The signal is broken, so treat the road as having no control
- Stop and wait until the light turns green
- Stop, then go when it is safe, as at a stop sign
Show answer
Answer: D. Stop, then go when it is safe, as at a stop sign
A flashing red light means the same as a stop sign. You must come to a complete stop and go only when it is safe. You do not have to wait for green.
Handbook: Section Four: Rules of the Road – Understanding Traffic Signals, Flashing Red Light
- The turn is allowed after you yield to oncoming traffic
- The turn is not allowed at any time of day
- Stop and stay stopped until a green arrow appears
- The green arrow has ended, so prepare to stop
Show answer
Answer: D. The green arrow has ended, so prepare to stop
A steady yellow arrow tells you the green arrow display is over. If you are too close to stop safely, you continue through the intersection with care. A flashing yellow arrow is the one that allows a turn after yielding.
Handbook: Section Four: Rules of the Road – Arrows, Steady Yellow Arrow
- Changing lanes is allowed if it is safe
- Changing lanes is not allowed
- The lane is only for vehicles with passengers
- Traffic in both lanes may be going in opposite directions
Show answer
Answer: B. Changing lanes is not allowed
Double solid white lines prohibit lane changes. A single broken white line allows a lane change when it is safe. Lines that separate opposing traffic are yellow, not white.
Handbook: Section Four: Rules of the Road – Pavement Markings
- Neither side may pass
- You may pass if the road ahead is clear
- Only the side with the wider lane may pass
- Passing is allowed only during the day
Show answer
Answer: A. Neither side may pass
Two solid yellow lines mean traffic from neither direction can pass. You may still cross a solid yellow line to turn into a driveway when it is safe.
Handbook: Section Four: Rules of the Road – Pavement Markings, Yellow lane markings
- You must come to a full stop and wait for a steady green arrow before you move
- Turns are banned until the arrow stops flashing and turns steady green
- You may go that way after yielding to oncoming traffic and pedestrians
- The signal is broken, so all drivers must treat the intersection as a four-way stop
Show answer
Answer: C. You may go that way after yielding to oncoming traffic and pedestrians
A flashing yellow arrow allows the move shown after you yield to oncoming traffic and pedestrians. It does not require a stop. A flashing red arrow is the one that requires a full stop first.
Handbook: Section Four: Rules of the Road - Understanding Traffic Signals, Arrows
- Treat it as a flashing red light and stop completely
- Slow down and be ready to yield to other traffic
- Keep your speed if you are on the wider, busier road
- Go through first because no light is shown against you
Show answer
Answer: B. Slow down and be ready to yield to other traffic
With a dark signal the manual tells you to reduce speed and prepare to yield to other vehicles in or approaching the intersection. It does not give anyone the right to go first.
Handbook: Section Four: Rules of the Road - Understanding Traffic Signals, Dark Traffic Signals
- Yes, if the road ahead is clear
- Yes, but only in daylight
- No, you may not pass
- Yes, if you signal first
Show answer
Answer: C. No, you may not pass
When the solid yellow line is on your side, you may not pass. You may pass only when the broken line is on your side and it is safe. Two solid yellow lines mean neither side may pass.
Handbook: Section Four: Rules of the Road - Pavement Markings, Yellow lane markings