Get the Pass

Florida permit test: signals and pavement markings

A steady red light means stop at the stop line. After a full stop you may turn right on red unless a NO TURN ON RED sign is posted, and you may turn left on red only from a one-way street onto a one-way street with traffic moving left. Always yield to pedestrians and oncoming traffic first. A yellow light means the light is changing, so stop if you can do so safely. A flashing red light means treat it like a stop sign. A flashing yellow light means proceed with caution. A flashing yellow arrow lets you turn but you must yield to oncoming traffic and pedestrians. If a signal is out and no officer is present, treat the intersection as a four-way stop. White lane lines separate traffic going the same way, and yellow lines separate traffic going opposite ways. On a double yellow line, the line on your side controls whether you may pass. A solid line on your side means no passing. Red reflectors facing you on lane lines mean you are going the wrong way. Pedestrians who already started crossing when the raised hand flashes should finish quickly.

Handbook: Chapter 6 Traffic Controls: Pavement Markings and Traffic Signals

7 practice questions

1. You come to an intersection with a flashing red traffic light. What should you do?
  1. Treat it like a stop sign: stop, then go when it is safe
  2. Slow down and go through with caution without stopping
  3. Stop and wait until the light turns green
  4. Ignore it, because the signal is broken
Show answer

Answer: A. Treat it like a stop sign: stop, then go when it is safe

A flashing red light is used at dangerous intersections and means the same as a stop sign. Stop completely, then go when it is safe. A flashing yellow light, not red, means proceed with caution.

Handbook: Chapter 6 Traffic Controls: Traffic Signals (Flashing Signal Lights)

2. You want to turn left and the signal shows a flashing yellow arrow. What does this mean?
  1. Oncoming traffic must stop for you
  2. Left turns are not allowed
  3. Stop and wait for a solid green arrow
  4. You may turn left, but you must yield to oncoming traffic and pedestrians
Show answer

Answer: D. You may turn left, but you must yield to oncoming traffic and pedestrians

A flashing yellow arrow allows a turn in the direction of the arrow. Oncoming traffic has a green light, so you must yield to it and to pedestrians before you turn.

Handbook: Chapter 6 Traffic Controls: Traffic Signals (Flashing Yellow Arrow)

3. On a two-lane road, the center has two yellow lines. The line on your side is solid and the line on the other side is broken. What does this mean for you?
  1. You may pass when it is safe
  2. You must not pass from your lane
  3. Only oncoming drivers are not allowed to pass
  4. Your lane is a reversible lane
Show answer

Answer: B. You must not pass from your lane

The line closest to you controls your lane. A solid yellow line on your side means passing is not allowed from your lane. You may still turn left or pass a bicyclist when it is safe.

Handbook: Chapter 6 Traffic Controls: Pavement Markings (Yellow Lane Lines)

4. At night you see red reflectors facing you on the lane lines. What does this mean?
  1. A railroad crossing is ahead
  2. Your lane ends ahead
  3. You are on the wrong side of the road, facing traffic
  4. A school zone begins ahead
Show answer

Answer: C. You are on the wrong side of the road, facing traffic

Red reflectors on lane lines always mean you are facing traffic the wrong way. Turn around or move into the proper lane at once. Red reflectors on the edge lines mean you are going the wrong way on a ramp.

Handbook: Chapter 7 Driving Safety: Traffic Lanes (Red Reflectors on Lane Lines)

5. You see a single solid white line between two lanes going the same direction. What does it mean?
  1. You may drive on both sides of it, but should not cross it unless you must avoid a hazard
  2. You may cross it freely to change lanes
  3. Traffic in one lane is going the opposite way
  4. You must not drive on either side of the line
Show answer

Answer: A. You may drive on both sides of it, but should not cross it unless you must avoid a hazard

A single solid white line separates same-direction lanes. Avoid crossing it except to dodge a hazard. A broken white line may be crossed when safe, and double solid white lines may not be crossed.

Handbook: Chapter 6 Traffic Controls: Pavement Markings (White Lane Lines)

6. You are already in a crosswalk when the pedestrian signal begins flashing a raised hand. What should you do?
  1. Go back to the curb where you started
  2. Quickly finish crossing the street
  3. Stop where you are and wait
  4. Run to the nearest corner away from traffic
Show answer

Answer: B. Quickly finish crossing the street

Never begin crossing when the raised hand is flashing or solid, but if you are already in the crosswalk, finish crossing quickly.

Handbook: Chapter 6 Traffic Controls: Pedestrian Signs & Signals

7. A traffic signal is dark because of a power outage, and no officer is directing traffic. How should you treat the intersection?
  1. As a yield intersection for all drivers
  2. As if the signal were flashing yellow
  3. As a four-way stop
  4. As an open intersection where the larger road goes first
Show answer

Answer: C. As a four-way stop

If a signal is out of order and no officer is present, treat the intersection as a four-way stop. Vehicles go in the order they arrive, and at the same time the driver on the left yields to the driver on the right.

Handbook: Chapter 6 Traffic Controls: Traffic Signals; Chapter 9 Handling Emergencies: Power Outage