Georgia permit test: signals and pavement markings
A red light means a full stop before the crosswalk or intersection. A yellow light warns that red is coming. A green light lets you go only after you stop for pedestrians and yield to vehicles in the intersection. A flashing red light works like a stop sign. A flashing yellow light means slow down and use caution. A flashing yellow left arrow lets you turn after you yield to oncoming traffic and pedestrians. If a signal is completely dark, treat the intersection as an all-way stop. A Pedestrian Hybrid Beacon stays dark until someone presses the button. It then shows flashing yellow, solid yellow, double solid red, and alternating flashing red. At the alternating red, stop and go only after pedestrians clear the crosswalk. A single solid yellow line to the right of a broken yellow line means no passing for your lane. Double white lines allow lane changes when dashed and forbid them when solid. You may enter a center left-turn lane no more than 300 feet before your turn. A yellow line always sits right of the center line at railroad crossings.
Handbook: Section 7: Signs, Signals & Markings - Traffic Signals and Signs
8 practice questions
- Treat it like a yield sign and go if no one is close
- Go through, because no light means no restriction
- Follow the cars ahead of you through the intersection
- Treat it like an all-way stop and stop before entering
Show answer
Answer: D. Treat it like an all-way stop and stop before entering
If a traffic signal is not working at all, all drivers must treat the intersection as if a stop sign were posted in every direction.
Handbook: Section 7: Signs, Signals & Markings - Traffic Signals and Signs
- You must stop and wait for a green arrow
- You must turn left before oncoming traffic arrives
- Left turns are not allowed at this time
- You may turn left after yielding to oncoming traffic and pedestrians
Show answer
Answer: D. You may turn left after yielding to oncoming traffic and pedestrians
A flashing yellow left arrow allows a left turn only after you yield. Oncoming traffic still has a green light.
Handbook: Section 7: Signs, Signals & Markings - Traffic Signals and Signs
- No more than 300 feet
- No more than 100 feet before the turn
- No more than 500 feet before the turn
- As far back as you like, if the lane is empty
Show answer
Answer: A. No more than 300 feet
Georgia law lets you use the center turn lane only to make a left turn. You may enter it no more than 300 feet from the place where you will turn.
Handbook: Section 7: Signs, Signals & Markings - Turn Lanes
- Changing lanes across the lines is prohibited
- You may cross the lines to pass slower traffic
- The lanes are reserved for buses only
- You may cross the lines only to make a left turn
Show answer
Answer: A. Changing lanes across the lines is prohibited
Double white lines show where you can or cannot cross into the next lane. When they are solid, lane changes are prohibited. When they are dashed, you may cross.
Handbook: Section 7: Signs, Signals & Markings - No Passing Lines
- It shows where the train gates stop
- It marks the lane for slow vehicles
- It tells you to stop at the tracks even with no train
- It prevents passing near the crossing
Show answer
Answer: D. It prevents passing near the crossing
At railroad crossings a yellow line is always placed on the right side of the center line to prevent passing. A large X and two R's are usually painted on the pavement too.
Handbook: Section 7: Signs, Signals & Markings - Pavement Markings - Railroad Crossings
- Slow down and go through with caution if clear
- Stop only if other traffic is close to you
- Stop fully, then go when safe
- Stop and wait for the light to turn green
Show answer
Answer: C. Stop fully, then go when safe
A flashing red light works like a stop sign. You stop completely and go only after you yield to pedestrians and other vehicles. A flashing yellow light is the one that lets you slow down and proceed with caution.
Handbook: Section 7: Signs, Signals & Markings - Traffic Signals and Signs
- Slow down and go through when no one is close
- Stop and wait until the beacon turns green
- Stop fully, go after pedestrians have cleared
- Treat the beacon as a yield sign and go
Show answer
Answer: C. Stop fully, go after pedestrians have cleared
Alternating flashing red signals on a Pedestrian Hybrid Beacon require a full stop. You may go when the pedestrians have cleared the crosswalk. The beacon then goes dark until someone pushes the button again.
Handbook: Section 7: Signs, Signals & Markings - Pedestrian-Hybrid Beacons (PHB)
- Passing is allowed only for motorcycles
- Passing is not allowed for traffic in your lane
- Passing is allowed for both directions of traffic
- Passing is allowed when the road ahead is clear
Show answer
Answer: B. Passing is not allowed for traffic in your lane
A solid yellow line on the right of the broken line shows a no passing zone for the lane you are in. If both yellow lines are solid, passing is unsafe in both directions.
Handbook: Section 7: Signs, Signals & Markings - Pavement Markings - No Passing Lines