Get the Pass

Hawaii permit test: road signs

Sign color and shape carry meaning. Red shows a prohibited action. Yellow, usually a diamond, warns of hazards. Orange warns of road work. Black and white rectangular signs show a required action, such as a speed limit or lane use. Green, blue and brown are for guide and information signs. A stop sign is an eight-sided white on red sign: stop at the stop line, or before the crosswalk if there is no line. A yield sign is triangular, and you stop only if others have the right-of-way. A Reduced Speed Ahead sign only warns you, and the new limit starts at the next speed limit sign. A pennant-shaped yellow and black sign marks the start of a no-passing zone, and Pass With Care signs mark its end. In work zones, stripes sloping down to the right on a barricade mean bear right. Flashing arrow panels guide you into open lanes, and flaggers wear orange and use red flags or stop and slow paddles.

Handbook: Chapter VI: Traffic Signs

7 practice questions

1. The stripes on a barricade slope downward to the right. What does this tell you?
  1. Bear to the left
  2. Bear to the right
  3. The road is closed to all traffic
  4. Stop and wait for a flagger
Show answer

Answer: B. Bear to the right

Stripes sloping downward to the right mean the driver should bear right, and stripes sloping downward to the left mean bear left.

Handbook: Chapter VI: Traffic Signs – Channelizing Devices

2. Which color on a sign warns of road work?
  1. Orange
  2. Green
  3. Red
  4. Yellow
Show answer

Answer: A. Orange

Orange warns of road work. Yellow warns of other hazards, red shows a prohibited action, and green is used on guide signs.

Handbook: Chapter VI: Traffic Signs – Colors and Shapes

3. What does a black and white rectangular sign show?
  1. A road work zone
  2. An action that is required
  3. A hazard that is ahead
  4. A place of interest to visit
Show answer

Answer: B. An action that is required

Black and white signs are always rectangular and indicate a required action, such as a speed limit or lane use.

Handbook: Chapter VI: Traffic Signs – Colors and Shapes

4. You stop at a stop sign, but there is no stop line. Where must you stop?
  1. Before you cross any marked or unmarked crosswalk
  2. At the point where you see cross traffic
  3. Past the crosswalk but before the curb line
  4. Where the sign is posted, even if you are far back
Show answer

Answer: A. Before you cross any marked or unmarked crosswalk

If there is no stop line, stop before the crosswalk. If you cannot see traffic from there, move ahead slowly and stop again where you can see.

Handbook: Chapter VI: Traffic Signs – Regulatory Signs

5. When must you stop at a yield sign?
  1. Only when other traffic has the right-of-way
  2. Always, in the same way that you would at a stop sign
  3. Only when a police officer is standing at the intersection
  4. Only at night, when you cannot see the cross street well
Show answer

Answer: A. Only when other traffic has the right-of-way

A yield sign is triangular, red and white. Be ready to stop, but you stop only when other traffic has the right-of-way.

Handbook: Chapter VI: Traffic Signs – Regulatory Signs

6. A yellow and black pennant-shaped sign is on the left side of the road. What does it mean?
  1. A school crossing is ahead of you on the road
  2. The end of a no-passing zone on this road
  3. The start of a no-passing zone
  4. A railroad crossing is ahead of you on the road
Show answer

Answer: C. The start of a no-passing zone

No Passing Zone signs are pennant-shaped and point to the beginning of the no-passing zone. Pass With Care signs show the end of such a zone.

Handbook: Chapter VI: Traffic Signs – Regulatory Signs

7. What does a large flashing arrow panel in a work zone tell you?
  1. Pull over to the shoulder and stop at once until the panel goes off
  2. Move into the indicated lane because the road ahead is closed
  3. Speed up so that you can pass through the work zone quickly
  4. A flagger is stationed ahead of you and will wave you through
Show answer

Answer: B. Move into the indicated lane because the road ahead is closed

Flashing or sequencing arrow panels guide drivers into certain lanes and show that part of the road ahead is closed. They are used both day and night.

Handbook: Chapter VI: Traffic Signs – Construction and Maintenance Devices