Get the Pass

Idaho permit test: signals and pavement markings

A steady red light means stop behind the line. After you stop, you may turn right on red unless a sign forbids it. You may turn left on red from a one-way street onto a one-way street. A flashing red light works like a stop sign. A steady red arrow forbids a turn in its direction. A yellow light means the signal will change to red. Stop if you can do so safely. A flashing yellow arrow lets you turn after you yield to oncoming traffic and pedestrians. A signal that does not work is a four-way stop. At a pedestrian hybrid beacon, a dark signal means go if the crosswalk is clear. Two steady red lights mean stop. Alternating flashing red lights mean stop, yield, and go when the crosswalk is clear. Double solid yellow lines allow a crossing only to turn left into or out of a driveway. With one solid and one dashed yellow line, only the dashed side may cross to pass. Double solid white lines forbid lane changes. At railroad crossings, stop within 50 feet but no closer than 15 feet from the nearest rail.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Traffic Signals, Pedestrian Crossings, Pavement Markings

7 practice questions

1. What must you do when you come to a flashing red light?
  1. Slow down and go through with caution, even if cross traffic is near
  2. Stop only if you can see other cars or pedestrians nearby
  3. Stop, yield to cross traffic and pedestrians, then go when clear
  4. Go through if no cross traffic is visible
Show answer

Answer: C. Stop, yield to cross traffic and pedestrians, then go when clear

A flashing red light means stop, the same as a stop sign. Come to a complete stop, yield to cross traffic and pedestrians, and go only when it is clear.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Traffic Signals

2. What does a flashing yellow arrow mean?
  1. You must stop completely and wait for a green light before you turn
  2. You have a protected turn with no need to yield to anyone
  3. You may turn after you yield to oncoming traffic and pedestrians
  4. The turn lane is closed
Show answer

Answer: C. You may turn after you yield to oncoming traffic and pedestrians

A flashing yellow arrow allows the turn, but only after you yield to oncoming traffic and to pedestrians in crosswalks. A green arrow, not a flashing yellow one, gives a protected turn.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Traffic Signals

3. The center of the road has one solid yellow line and one dashed yellow line. The dashed line is on your side. What may you do?
  1. Never cross the lines for any reason, even to pass or to turn
  2. Cross the lines only when you are turning left at an intersection
  3. Cross the lines to pass if it is safe
  4. Cross the lines only when there is no traffic at all behind you
Show answer

Answer: C. Cross the lines to pass if it is safe

With one solid and one dashed yellow line, only drivers in the lane next to the dashed line may cross to pass, and only when it is safe. Drivers on the solid-line side may not.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Pavement Markings

4. You must stop for a train at a railroad crossing. Where should you stop?
  1. Exactly 5 feet from the nearest rail, so you can see both ways
  2. Directly on the tracks if a line of cars is waiting behind you
  3. At least 100 feet from the nearest rail
  4. Within 50 feet but no closer than 15 feet to the nearest rail
Show answer

Answer: D. Within 50 feet but no closer than 15 feet to the nearest rail

When you must stop at a railroad crossing, stop within 50 feet but no closer than 15 feet from the nearest rail. Never stop with any part of your vehicle on the tracks.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Intersections, Railroad Crossings

5. At a pedestrian hybrid beacon, the two red lights flash alternately. What must you do?
  1. Go through at once if the pedestrian has already moved past your lane
  2. Slow down and treat the beacon as a yield sign until the lights go dark
  3. Stop, yield to pedestrians in the crosswalk, and go on when it is clear
  4. Stay stopped until the signal turns green and shows you a go indication
Show answer

Answer: C. Stop, yield to pedestrians in the crosswalk, and go on when it is clear

Alternating flashing red lights work like a stop sign. You must stop, let pedestrians in the crosswalk finish, and then proceed when the crosswalk is clear.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Pedestrian Crossings

6. The center of a two-way road has double solid yellow lines. When may you cross them?
  1. When you pass a slower vehicle and no oncoming traffic is in sight
  2. When you drive on the side of the road that has the lighter traffic
  3. When you turn left into or out of a driveway, if it is safe
  4. Only during daylight hours, and only to pass another vehicle
Show answer

Answer: C. When you turn left into or out of a driveway, if it is safe

Double solid yellow lines mean no passing for traffic in either direction. You may cross them only to turn, such as a left turn into a driveway, and only when it is safe.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Pavement Markings

7. What do double solid white lines between lanes mean?
  1. You may change lanes if you signal first and check your blind spot
  2. Lane changes are prohibited where the lines are present
  3. The lane next to the lines is reserved for bicycles and other slow traffic
  4. The road ahead narrows, so drivers must merge into a single lane
Show answer

Answer: B. Lane changes are prohibited where the lines are present

Double solid white lane lines forbid lane changes. A single solid white line means you should avoid changing lanes, and a dashed white line means you may change when it is safe.

Handbook: Driver's Handbook (July 2026), Highway & Vehicle Knowledge: Pavement Markings