Illinois permit test: signals and pavement markings
A steady red light means stop at the stop line, the crosswalk, or the intersection, in that order. You may turn right on red after a full stop and yielding, unless a sign bans it. You may also turn left on red from a one-way street onto a one-way street with traffic moving left. A flashing red light is treated like a stop sign. A flashing yellow light means proceed with caution. A flashing yellow arrow lets you turn after yielding to pedestrians and vehicles. If signals are not working, treat the intersection as an all-way stop. A yellow X over a lane means the signal will change to red, so leave the lane. Never drive in a lane with a red X. On pavement, solid double white lines may not be crossed. Yellow lines separate traffic moving in opposite directions. If a solid and a broken yellow line separate the lanes, you may pass only when the broken line is nearest your lane. A railroad crossbuck is a yield sign. When crossing lights flash or gates are down, stop and stay stopped until the lights stop.
Handbook: Chapter 10: Traffic Signals and Pavement Markings
7 practice questions
- Proceed if the cross street looks clear to you
- Slow down and let the other driver choose
- Treat it as a flashing yellow and proceed with caution
- Treat it as an all-way stop
Show answer
Answer: D. Treat it as an all-way stop
When signals are not working, you must treat the intersection as an all-way stop. Stop, then look and yield the right of way before you enter, unless an officer directs otherwise.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Traffic Signals (p. 78)
- You must come to a full stop, then turn
- You have a protected turn with no need to yield to anyone
- You may turn after yielding to traffic
- The turn is prohibited until a green arrow appears
Show answer
Answer: C. You may turn after yielding to traffic
A flashing yellow arrow lets you turn in the arrow's direction after yielding the right of way to pedestrians and vehicles in the intersection or crosswalk.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Arrows (p. 79)
- Only when the solid line is nearest your lane
- Never, on this kind of road
- Only when the broken line is nearest your lane
- Whenever no oncoming car is in sight on the road ahead
Show answer
Answer: C. Only when the broken line is nearest your lane
With a solid and a broken yellow line, you may pass only when the broken line is on your side. A solid line on your side means no passing.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Yellow No Passing Lines (p. 81)
- The signal will turn red soon, so leave the lane
- The lane is for emergency vehicles only, so stay out of it
- You may use the lane only to turn left, nothing else
- Slow down and stay in the lane until it changes
Show answer
Answer: A. The signal will turn red soon, so leave the lane
A yellow X means the lane signal is about to change to red. Leave the lane safely before the red X appears, and never drive in a lane showing a red X.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Lane Signals (p. 79)
- Stop only if other vehicles are approaching
- Stop, yield, then go when it is safe
- Stop and wait until the light turns green
- Slow down and proceed with caution
Show answer
Answer: B. Stop, yield, then go when it is safe
A flashing red light works like a stop sign. You must stop, yield, and proceed when safe. Slowing and proceeding is the rule for a flashing yellow.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Traffic Signals (p. 78)
- Crossing it is prohibited
- Crossing it is allowed only when turning
- Crossing it is allowed when there is no traffic
- Crossing it is allowed with special care
Show answer
Answer: A. Crossing it is prohibited
A solid double white line separates same-direction lanes and may not be crossed. A single solid white line may be crossed only with special care and is discouraged.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Pavement Markings (p. 80)
- As a yield sign: give way to any train
- As an advisory only: you may ignore it
- As a stop sign: always stop before the tracks
- As a no-passing sign for the next 100 feet
Show answer
Answer: A. As a yield sign: give way to any train
The crossbuck is treated as a yield sign. Slow down, look and listen in both directions, and stop if a train is coming.
Handbook: Chapter 10: Traffic Signals and Pavement Markings - Railroad Crossings (p. 82)