Indiana permit test: turns and lanes
Move into the correct lane well before a turn and signal. For a left turn, be in the far-left lane for your direction. For a right turn, be in the far-right lane. Yield to oncoming vehicles and pedestrians. Change one lane at a time, check mirrors, look over your shoulder, and signal. To pass, make sure the lane is clear, because you must be back on the right at least 100 feet before an oncoming vehicle. Do not pass on a curve or near the crest of a hill. Do not pass within 100 feet of an intersection, railroad crossing, bridge, viaduct or tunnel. Do not pass across a solid yellow line on your side. If you are being passed, do not speed up. You may turn right on red after a full stop if no sign forbids it. You may turn left on red only from a one-way street onto a one-way street. Never make a U-turn on a curve, near a hill crest or on an interstate. Never use a center left-turn lane for passing. Trucks must use the right lane on a two-lane interstate and the right two lanes on larger interstates.
Handbook: Chapter 7: Safe Vehicle Operation
7 practice questions
- At least 50 feet before the oncoming vehicle
- At least 100 feet before the oncoming vehicle
- At least 200 feet before the oncoming vehicle
- At least 30 feet before the oncoming vehicle
Show answer
Answer: B. At least 100 feet before the oncoming vehicle
Make sure the passing lane is clear, because you must return to the right side no less than 100 feet before an oncoming vehicle.
Handbook: Chapter 7: Safe Vehicle Operation - Passing Other Vehicles
- Within 100 feet of an intersection, railroad crossing, bridge or tunnel
- On a straight road with a broken white line along the lane edge
- On a multi-lane road where a broken yellow line is on your side
- In a lane on a road with two lanes of traffic going the same way
Show answer
Answer: A. Within 100 feet of an intersection, railroad crossing, bridge or tunnel
Passing is also prohibited on curves, near the crest of a hill, and where there is a solid yellow line on your side of the road.
Handbook: Chapter 7: Safe Vehicle Operation - Prohibited Passing
- Cross both lanes at once to save time
- Signal once and move across both lanes
- Move over only when the car behind you honks
- Change one lane at a time, and signal each time
Show answer
Answer: D. Change one lane at a time, and signal each time
Change only one lane at a time and signal. Check your mirrors and briefly look over your shoulder for vehicles in your blind spot.
Handbook: Chapter 7: Safe Vehicle Operation - Changing Lanes and Passing Other Vehicles
- In the far-left lane for your direction of travel
- In the far-right lane, then turn across traffic
- In any lane, if you signal early
- In the lane with the least traffic
Show answer
Answer: A. In the far-left lane for your direction of travel
To turn left, be in the far-left lane for your direction of travel. To turn right, be in the far-right lane. Use your turn signal well before the turn.
Handbook: Chapter 7: Safe Vehicle Operation - Rules for Safe and Legal Turning
- Stop on the shoulder and back up carefully to the missed exit
- Make a U-turn across the median when you see no traffic coming
- Go to the next exit and re-enter in the opposite direction
- Wait for a gap, then cross the grass median to the other side
Show answer
Answer: C. Go to the next exit and re-enter in the opposite direction
You may not back up on an interstate or make a U-turn through the median, except for emergency and highway maintenance vehicles. Drive to the next exit.
Handbook: Chapter 7: Safe Vehicle Operation - U-Turns; Driving on Interstate Highways
- Slow down and turn if you do not see any cars coming toward you
- Come to a full stop and check for vehicles and pedestrians first
- Turn without stopping, as long as you use your turn signal first
- Wait until the pedestrian signal in front of you turns green first
Show answer
Answer: B. Come to a full stop and check for vehicles and pedestrians first
Before you turn right on red, you must stop completely, look for traffic and pedestrians, check that there is no No Turn on Red sign, and use the correct lane.
Handbook: Chapter 6: Traffic Signs and Signals - Turning through a Solid Red Light
- When turning from a one-way street onto a one-way street, after a full stop
- When turning from any two-way street onto another two-way street, after a stop
- When the road ahead is clear and you have signaled for 100 feet first
- When you are at the front of the line and nobody is behind you
Show answer
Answer: A. When turning from a one-way street onto a one-way street, after a full stop
A left turn on red is allowed only from a one-way street onto a one-way street. You must stop first, check for vehicles and pedestrians, and make sure there is no No Turn on Red sign.
Handbook: Chapter 6: Traffic Signs and Signals - Turning through a Solid Red Light