Get the Pass

Iowa permit test: signals and pavement markings

A solid red light means stop. A flashing red light works like a stop sign. A steady yellow light means do not enter if you can stop safely. A flashing yellow light means proceed with caution and yield to vehicles and pedestrians. A steady yellow arrow means the turn signal is about to turn red. A flashing yellow arrow means yield to oncoming traffic and pedestrians, then turn with caution. On two-way roads, yellow lines separate traffic that moves in opposite directions and white lines separate lanes that move the same way. Where a solid yellow line sits next to a dashed one, you may pass only on the dashed side, and only when it is safe. Reversible lanes use signals: a green arrow means use the lane, a red X means do not, a flashing yellow X means turns only, and a steady yellow X means the lane use is changing, so leave it when safe. At a pedestrian hybrid beacon, stop when the red lights show and proceed with caution during the flashing red phase only if the crosswalk is clear. With no stop line at a railroad crossing, stop at least 15 feet from the nearest rail.

Handbook: Chapter 2, 2.9, 2.12 to 2.16, 2.20

8 practice questions

1. What must you do at a flashing red traffic light?
  1. Slow down and proceed with caution
  2. Stop only if other cars are close
  3. Stop only if a pedestrian is crossing
  4. Treat it like a stop sign
Show answer

Answer: D. Treat it like a stop sign

A flashing red light means stop, just like a stop sign. Only a flashing yellow light lets you continue with caution.

Handbook: Chapter 2, 2.9 Traffic Signals

2. You face a steady yellow arrow for a left turn and you are still behind the stop line. What should you do?
  1. Stop if you safely can, since it will turn red
  2. Speed up and turn before the arrow changes to red
  3. Turn left right away since the arrow still allows it
  4. Wait for oncoming traffic to stop, then turn left
Show answer

Answer: A. Stop if you safely can, since it will turn red

A steady yellow arrow warns that the turn signal will turn red. Do not enter if you can stop safely. Only drivers already in the intersection complete the turn.

Handbook: Chapter 2, 2.9 Traffic Signals

3. What does a flashing yellow arrow for a left turn mean?
  1. Turn left first because oncoming traffic must stop
  2. Yield to oncoming traffic, then turn with care
  3. Stop and wait until you get a green arrow
  4. Go straight only and do not turn left at all
Show answer

Answer: B. Yield to oncoming traffic, then turn with care

Oncoming traffic has a green light during a flashing yellow arrow, so you must yield to it and to pedestrians. A steady green arrow is the one that makes oncoming traffic stop.

Handbook: Chapter 2, 2.9 Traffic Signals

4. On a two-way road, a solid yellow line is next to a dashed yellow line. When may you pass?
  1. When the solid line is on your side of the road
  2. Never, since yellow lines always ban passing
  3. When the dashed line is on your side
  4. Only when you drive below the posted speed limit
Show answer

Answer: C. When the dashed line is on your side

Passing is not allowed on the side with the solid yellow line. Drivers on the dashed side may pass only when it is safe to do so.

Handbook: Chapter 2, 2.12 Pavement Markings and Other Lane Controls

5. What do yellow lines on the pavement separate?
  1. Traffic moving in the same direction
  2. Bike lanes from travel lanes
  3. Parking spaces from travel lanes
  4. Traffic moving in opposite directions
Show answer

Answer: D. Traffic moving in opposite directions

Yellow lines divide traffic that travels in opposite directions. White lines divide lanes of traffic that move in the same direction.

Handbook: Chapter 2, 2.12 Pavement Markings and Other Lane Controls

6. Above a reversible lane you see a steady yellow X. What does it mean?
  1. Lane use is changing; leave it when safe
  2. The lane is for turning traffic only right now
  3. The lane is open for you to use at this time
  4. The lane is closed to every vehicle all day
Show answer

Answer: A. Lane use is changing; leave it when safe

A steady yellow X warns that the use of the lane is changing. A flashing yellow X means turns only, a red X means do not use the lane, and a green arrow means use it.

Handbook: Chapter 2, 2.15 Reversible Lanes

7. A pedestrian hybrid beacon shows two flashing red lights. What must you do?
  1. Keep driving, since flashing red means a beacon failure
  2. Stop if not yet stopped, then go if clear
  3. Wait until the lights turn solid yellow, then go
  4. Stay stopped until the lights go dark, even if clear
Show answer

Answer: B. Stop if not yet stopped, then go if clear

When the two red lights flash, you must stop if you are not already stopped. You may then proceed with caution once the crosswalk is clear.

Handbook: Chapter 2, 2.20 Bicycle and Pedestrian Signals

8. You approach a railroad crossing that has no painted stop line. How far from the nearest rail must you stop?
  1. At least 5 feet
  2. At least 30 feet
  3. At least 15 feet
  4. At least 100 feet
Show answer

Answer: C. At least 15 feet

The manual tells you to stay behind the white stop line, and if there is none, to stop at least 15 feet from the nearest rail. Trains are wider than the tracks.

Handbook: Chapter 2, 2.10 Railroad Crossings (figure 2.2)