Get the Pass

Kansas permit test: signals and pavement markings

A steady green light lets you go if the intersection is clear, and you must still yield to others. A steady yellow means the light is about to turn red, so stop if you can do so safely. A flashing yellow means slow down and proceed with caution. A steady red means stop behind the line. You may turn right on red after a full stop unless a sign prohibits it, and some left turns on red are allowed from a one-way street onto another one-way street. A flashing red light works like a stop sign. A red arrow means do not go in that direction until a green arrow or light returns. Yellow lines separate traffic moving in opposite directions. A dashed yellow line on your side lets you pass when it is safe. A solid yellow line on your side means no passing. Two solid yellow lines mean neither side may pass. White lines separate lanes going the same way: dashed means you may change lanes, solid means stay in your lane.

Handbook: Section 6: Traffic Signals; Pavement Markings

7 practice questions

1. What does a flashing red traffic light mean?
  1. Stop, then go when it is safe, as at a stop sign
  2. Slow down and proceed with caution through the intersection
  3. Stop and wait until the light turns green before you go
  4. Yield only if there is cross traffic in the intersection
Show answer

Answer: A. Stop, then go when it is safe, as at a stop sign

A flashing red light works like a stop sign. You must make a complete stop, look both ways and yield the right-of-way before you go. A flashing yellow light is the one that only calls for caution.

Handbook: Section 6: Rules of the Road - Traffic Signals

2. What does a flashing yellow traffic light mean?
  1. Stop, then go when it is clear
  2. The light is about to turn red
  3. Speed up to clear the intersection
  4. Slow down and proceed with caution
Show answer

Answer: D. Slow down and proceed with caution

A flashing yellow light means slow down and proceed with caution. Be ready to stop for traffic entering the intersection. It does not require a full stop.

Handbook: Section 6: Rules of the Road - Traffic Signals

3. The light turns steady yellow as you approach an intersection. What should you do?
  1. Slow down and stop if you can do so safely
  2. Speed up to get through
  3. Stop immediately, even if a car is close behind you
  4. Treat it as a green light
Show answer

Answer: A. Slow down and stop if you can do so safely

A steady yellow means the light is about to turn red. Stop if you can safely do so with traffic behind you. If you are already in the intersection, continue through.

Handbook: Section 6: Rules of the Road - Traffic Signals

4. What does a red arrow mean?
  1. Stop, then turn that way after you check for traffic
  2. Yield to others and turn in that direction when it is clear
  3. Stop, and do not go that way until a green arrow shows
  4. The lane the arrow points to is closed for the day
Show answer

Answer: C. Stop, and do not go that way until a green arrow shows

A red arrow means stop. You may not go in the direction of the arrow until the green arrow or light returns. This differs from a plain red light, where a right turn after stopping can be allowed.

Handbook: Section 6: Rules of the Road - Traffic Signals

5. When may you turn right at a red traffic light in Kansas?
  1. Without stopping, as long as no cars are coming toward you
  2. After a full stop and a check for traffic, if no sign prohibits it
  3. Only when a green arrow is also shown at the signal
  4. Never, unless a police officer is directing traffic there
Show answer

Answer: B. After a full stop and a check for traffic, if no sign prohibits it

If no sign prohibits a right turn on red, you may turn after stopping and checking for traffic and pedestrians. Always yield to pedestrians crossing in front of you.

Handbook: Section 6: Rules of the Road - Traffic Signals

6. A solid yellow line and a dashed yellow line separate two lanes of traffic. The solid line is on your side. May you pass?
  1. No, because the solid line is on your side
  2. Yes, if there is a safe gap in oncoming traffic
  3. Yes, but only when you are driving above 40 mph
  4. Yes, if you turn on your left signal before you go
Show answer

Answer: A. No, because the solid line is on your side

If the solid yellow line is on your side, you must not pass. You may pass only when the dashed line is on your side and there is a safe gap.

Handbook: Section 6: Rules of the Road - Pavement Markings, Yellow Lane Markings

7. What does a dashed white line between lanes going the same way mean?
  1. You may not change lanes
  2. The lane ends ahead
  3. You may change lanes if there is a safe gap
  4. Only buses may use the lane
Show answer

Answer: C. You may change lanes if there is a safe gap

A dashed white line separates lanes going the same direction and you may cross it to change lanes when it is safe. A solid white line means stay in your lane unless a special situation requires a change.

Handbook: Section 6: Rules of the Road - Pavement Markings, White Lane Markings