Get the Pass

Kentucky permit test: signals and pavement markings

A green light lets you go after you yield to vehicles and pedestrians already in the intersection. On a green light, a left turn must yield to oncoming traffic. A yellow light means the signal is about to turn red, so stop if you can do so safely. You may clear an intersection on red if you entered on yellow, but entering after the light turns red is against the law. On red, stop behind the line or crosswalk. You may turn right after stopping if the way is clear and no sign forbids it. You may turn left on red only from a one-way street onto a one-way street, after stopping. A flashing yellow light means slow down and watch for others. A flashing red light means a full stop, then go when clear. Two flashing red lights mark a railroad crossing. A green arrow lets you go in its direction from the proper lane. A flashing yellow arrow means proceed with caution. A red arrow forbids that turn. With several signals, obey the one over your lane. An officer's directions override signals and signs.

Handbook: Section Six: Rules of the Road – Traffic Signals

8 practice questions

1. A police officer is directing traffic at an intersection with a working green light for your direction. What do you do?
  1. Follow the officer's directions instead of the signal
  2. Obey the green light and ignore the officer's hand signals
  3. Stop your vehicle and wait until the officer has left
  4. Follow whichever one allows you to move through first
Show answer

Answer: A. Follow the officer's directions instead of the signal

At an intersection where an officer is directing traffic, you do what the officer instructs regardless of signals or signs. The officer's directions come first.

Handbook: Section Six: Rules of the Road – Traffic Control Devices

2. You are at a red light and want to turn right. No sign prohibits it. What must you do?
  1. Turn right without stopping if you can see no cars coming
  2. Stop first, then turn when the way is clear of vehicles and pedestrians
  3. Wait for the light to turn green before you make the turn
  4. Turn only from the left lane after you have come to a stop
Show answer

Answer: B. Stop first, then turn when the way is clear of vehicles and pedestrians

Unless a sign forbids it, you must first stop and then turn right when the roadway is clear of vehicle or pedestrian traffic. A rolling turn without stopping is not allowed.

Handbook: Section Six: Rules of the Road – Traffic Signals (Red)

3. What does a flashing red light mean?
  1. Slow down and watch for other traffic
  2. The signal is broken, so drive through normally
  3. Come to a full stop and go only when it is clear
  4. Stop only if other cars are present
Show answer

Answer: C. Come to a full stop and go only when it is clear

A flashing red light works like a stop sign. You must come to a full stop and proceed only when it is clear. A flashing yellow means slow down and watch for others.

Handbook: Section Six: Rules of the Road – Flashing Lights

4. What does a flashing yellow arrow mean?
  1. Stop and wait until the arrow turns solid green again
  2. Turns in the direction of the arrow are strictly forbidden
  3. Go only if the cross street is blocked by other traffic
  4. Proceed with caution in the direction of the arrow
Show answer

Answer: D. Proceed with caution in the direction of the arrow

A flashing yellow arrow tells you to proceed with caution in the direction of the arrow. A red arrow, not a flashing yellow one, forbids the turn.

Handbook: Section Six: Rules of the Road – Lighted Arrows

5. A traffic signal is mounted horizontally. Which light is on the left?
  1. Green
  2. Red
  3. Yellow
  4. It changes by location
Show answer

Answer: B. Red

On horizontal signals used in some metropolitan areas, red is on the left, yellow is in the middle and green is on the right.

Handbook: Section Six: Rules of the Road – Traffic Signals

6. You entered an intersection on a yellow light and the light turns red while you are inside. What may you do?
  1. Continue through and clear the intersection
  2. Stop in the middle of the intersection until it is clear
  3. Back up behind the stop line so you do not block cars
  4. Wait in the intersection for the next green light to move
Show answer

Answer: A. Continue through and clear the intersection

A vehicle may clear an intersection on a red light if it entered while the signal was yellow. Entering after the light turns red is against the law.

Handbook: Section Six: Rules of the Road – Traffic Signals (Yellow)

7. When may you turn left on a red light in Kentucky?
  1. From any two-way street onto another two-way street after stopping
  2. Never, because left turns on red are banned on every road
  3. Whenever the cross street looks empty of cars and walkers
  4. Only from a one-way street onto a one-way street, after stopping
Show answer

Answer: D. Only from a one-way street onto a one-way street, after stopping

Kentucky allows a left turn on red only when turning from a one-way street onto a one-way street, and you must stop first. Turning from a two-way street on red is not permitted.

Handbook: Section Six: Rules of the Road – Traffic Signals (Red)

8. What does a steady yellow traffic light mean?
  1. Speed up so that you can clear the intersection before the red
  2. The light is about to turn green, so get ready to go straight
  3. The light is about to turn red, so stop if you can do so safely
  4. Yield only to pedestrians and then continue through the light
Show answer

Answer: C. The light is about to turn red, so stop if you can do so safely

A yellow light warns that the signal is about to turn red. You should stop if you can do it safely instead of speeding up.

Handbook: Section Six: Rules of the Road – Traffic Signals