Get the Pass

Kentucky permit test: turns and lanes

To turn, search the corners, signal and enter the lane closest to the direction you want to go. If you turn at an intersection, signal 100 feet before the turn. Turn right from the right-most part of your lane and left from the left-most part. When you turn left, yield to oncoming traffic. In multiple turn lanes, stay in your lane until the turn is done. Before you change lanes, check your mirrors and your blind spot over your shoulder, find a gap and signal. Use the acceleration lane to reach the speed of traffic before you merge. In general, pass on the left. You may not pass when there is a solid line on your side. Finish a pass before a no-passing zone begins and before you come within 200 feet of an oncoming vehicle. The left lane is for passing or turning left, and staying in the left lane on a limited access highway is illegal.

Handbook: Section Seven: General Driving – Turning and Turnabouts; Passing

8 practice questions

1. What does Kentucky say about staying in the left lane of a limited access highway?
  1. It is the best lane for slow vehicles
  2. It is legal if you keep a four-second gap
  3. It is required for trucks
  4. Remaining in the left lane is illegal
Show answer

Answer: D. Remaining in the left lane is illegal

The manual says the left lane is for passing or turning left, and remaining in the left lane on a limited access highway is illegal.

Handbook: Section Seven: General Driving – Use of Lanes

2. What is a shared center lane marked for left turns only used for?
  1. Passing slower vehicles that are traveling ahead of you
  2. Through traffic during the morning and evening rush hours
  3. Left turns by vehicles from either direction
  4. Short stops by vehicles that are loading or unloading
Show answer

Answer: C. Left turns by vehicles from either direction

This lane is reserved for left-turning vehicles from either direction. It is not for through traffic or passing.

Handbook: Section Six: Rules of the Road – Regulatory Signs

3. From which part of your lane should you make a left turn at an intersection?
  1. The left-most portion of your lane
  2. The right-most portion of your lane
  3. Wide to the right, then sweep left
  4. The center of the intersection
Show answer

Answer: A. The left-most portion of your lane

You turn left from the left-most part of your lane and right from the right-most part. Swinging wide leads into other lanes.

Handbook: Section Seven: General Driving – Left Turns

4. You are entering a multi-lane highway from an acceleration lane. What should you do?
  1. Stop at the end of the lane and wait until traffic clears
  2. Reach the speed of traffic, find a gap and merge
  3. Merge at a speed slower than the traffic in the lane
  4. Force your way into the nearest lane and then speed up
Show answer

Answer: B. Reach the speed of traffic, find a gap and merge

Use the acceleration lane to reach the speed of other vehicles, find a gap and merge. Existing traffic has the right of way.

Handbook: Section Seven: General Driving – Entering a Multi-lane Highway

5. On a two-lane road, which center-line marking means you may not pass?
  1. A broken line on the oncoming side only
  2. A white dashed line on the right edge
  3. A solid line on your side of the broken line
  4. Any line when no vehicle is behind you
Show answer

Answer: C. A solid line on your side of the broken line

You may not pass when there is a solid line on your side of the broken line. You may pass if the solid line is on the other driver's side.

Handbook: Section Seven: General Driving – Passing

6. By law, when must a pass be completed in Kentucky?
  1. Within ten seconds of the moment you leave your own lane
  2. Before the no-passing zone begins and before you come within 200 feet of oncoming traffic
  3. Before you reach a solid line that is on the right side
  4. Before you reach the next posted road sign on the route
Show answer

Answer: B. Before the no-passing zone begins and before you come within 200 feet of oncoming traffic

Kentucky requires you to finish a pass before the start of a no-passing zone and before you come within 200 feet of an oncoming vehicle.

Handbook: Section Seven: General Driving – Passing

7. How far before an intersection turn should you signal?
  1. 25 feet
  2. 50 feet
  3. 300 feet
  4. 100 feet
Show answer

Answer: D. 100 feet

If you plan to turn at an intersection, signal 100 feet before the turn.

Handbook: Section Seven: General Driving – Turning and Turnabouts

8. Before you change lanes, what should you check besides your mirrors?
  1. Your blind spot, by looking over your shoulder
  2. Only the image shown in your rearview mirror this time
  3. The reading on your speedometer and the fuel gauge
  4. Whether the hazard lights are turned on or turned off
Show answer

Answer: A. Your blind spot, by looking over your shoulder

Mirrors do not show the blind spots, so you turn your head and look over your shoulder in the direction you plan to move.

Handbook: Section Seven: General Driving – Changing Lanes