Maine permit test: signals and pavement markings
A green light means go, if the way is clear. A yellow light means the light is about to turn red, so begin to slow down. At a red light you must stop before the intersection and wait behind the stop line or crosswalk. A right turn on red is allowed after you stop, unless a sign bans it, and you must yield to pedestrians and all vehicle traffic. A flashing yellow light means slow down and proceed with caution. A flashing red light means stop and look both ways before you enter. A green arrow on a red light lets you go in the arrow's direction while you yield to others. With more than one light, obey the one over your lane. Overhead lane lights use a red X for do not use the lane, a yellow X for clear the lane, and a green arrow for use the lane. Yellow lines separate traffic that goes in opposite directions. A solid yellow line on your side means you should not pass. White lines separate lanes that go the same way. A solid white line discourages lane changes, and a broken white line allows them.
Handbook: Section 6: Rules of the Road – Traffic Signals; Pavement Markings
6 practice questions
- Stop, look both ways, and go only when the way is clear
- Slow down and go through with caution, as for a flashing yellow light
- Stop only if you see other vehicles waiting at the intersection
- Go through at the posted speed, because you have the right of way
Show answer
Answer: A. Stop, look both ways, and go only when the way is clear
A flashing red light works like a stop sign: stop and look both ways before you enter. A flashing yellow light is the one that means slow down and proceed with caution.
Handbook: Section 6: Rules of the Road – Traffic Signals
- You must wait for the red light itself to turn green before you make the turn
- You may turn right and you have the right of way over all other traffic there
- You may turn right with caution, yielding to all vehicle and pedestrian traffic
- You must go straight ahead, because the arrow overrides the red light for turns
Show answer
Answer: C. You may turn right with caution, yielding to all vehicle and pedestrian traffic
A green arrow means you may go in that direction, but you must still yield to pedestrians and to vehicles that are in the intersection. The arrow gives you permission to move, not the right of way.
Handbook: Section 6: Rules of the Road – Traffic Signals: Lighted Arrows
- After a full stop, unless a sign bans it, yielding to pedestrians and traffic
- Never, unless a police officer waves you through the red light at the intersection
- After you slow down to 5 mph, so that you do not need to come to a full stop
- Only at night, when there is less traffic on the cross street to watch for
Show answer
Answer: A. After a full stop, unless a sign bans it, yielding to pedestrians and traffic
Maine allows a right turn on red after you stop, unless a sign bans it. You must yield to pedestrians and all vehicle traffic before you turn.
Handbook: Section 6: Rules of the Road – Traffic Signals
- Do not pass other vehicles
- Pass only if no oncoming car is in sight
- Pass only if the vehicle ahead is slower than 25 mph
- Use the line as a guide and pass whenever you are ready
Show answer
Answer: A. Do not pass other vehicles
A solid line on your side means you should not pass. You may pass only where a broken center line is on your side and no oncoming cars are in the passing lane.
Handbook: Section 7: General Driving – Passing: Signs and Markings
- The lanes have different uses and lane changes across the line are discouraged
- The road is two-way, and you may pass on either side of the line when clear
- Traffic in the lane next to you travels in the opposite direction from your lane
- You must stop at the line before you change lanes into the next lane over
Show answer
Answer: A. The lanes have different uses and lane changes across the line are discouraged
Solid white lines separate lanes of traffic going the same way that have different uses, and they discourage lane changes. A broken white line shows lanes where a safe lane change is allowed.
Handbook: Section 6: Rules of the Road – Use of Lanes: Signs and Road Markings
- Behind the stop line
- In the crosswalk, so you can see the cross traffic better
- Past the crosswalk, at the edge of the intersection
- Anywhere before the sign, if no pedestrian is waiting
Show answer
Answer: A. Behind the stop line
At a stop sign or signal you must stop behind the stop line or crosswalk. If a stop line is before the crosswalk, you stop at the stop line. Stop lines leave room for pedestrians to walk in front of your car.
Handbook: Section 6: Rules of the Road – Crosswalks and Stop Lines