Maryland permit test: signals and pavement markings
At a steady red light, stop at the stop line. If there is no line, stop before the crosswalk and the intersection. Unless a sign bans it, you may turn right on red after a full stop, and you may turn left on red only from a one-way street onto another one-way street. Always yield to pedestrians and traffic. A steady yellow means the light is about to turn red. A flashing yellow means slow down and proceed with caution. A flashing red works like a stop sign. A signal that is not working also means stop, yield, and go only when it is safe. A red X over a lane means never drive in it. On the road, a broken yellow line separates opposing traffic and allows passing with care. A double solid yellow line bans passing both ways, though you may cross it to turn left into a driveway. With a solid and a broken yellow line, only the broken-line side may pass. White lines separate traffic going the same way. A solid white line marks the right edge of the road. Yield lines are rows of small triangles.
Handbook: Section 4: Signs, Signals and Pavement Markings
8 practice questions
- Before the crosswalk and the intersection
- At the point where you can see cross traffic clearly
- In the middle of the intersection, past the lines
- After you enter the crosswalk so you can see traffic
Show answer
Answer: A. Before the crosswalk and the intersection
If there is no stop line, you must stop before the crosswalk and before entering the intersection. Stay stopped as long as the signal is red.
Handbook: Section 4.A: Traffic Signals
- Only when no cars are visible, with no stop needed at all
- Only when the cross street has a stop sign of its own
- After a full stop, yielding to pedestrians and traffic
- Never, because a red light always means wait for green
Show answer
Answer: C. After a full stop, yielding to pedestrians and traffic
Unless a sign prohibits it, you may turn right on red after coming to a complete stop. You must yield the right-of-way to pedestrians and all other traffic.
Handbook: Section 4.A: Traffic Signals
- Onto another one-way street, after a full stop, unless a sign bans it
- When turning onto any two-way street, after a full stop and a check
- Only when you have a green arrow signal showing at the same time
- Never; left turns on red are not allowed in Maryland
Show answer
Answer: A. Onto another one-way street, after a full stop, unless a sign bans it
Maryland allows a left turn on red only from a one-way street to another one-way street, after a complete stop and unless a sign forbids it.
Handbook: Section 4.A: Traffic Signals
- Stop, yield to others, and go when it is clear
- Treat it as a yield sign and keep your speed steady
- Stop only if you see another vehicle near the intersection
- Slow down and go through if nothing is coming either way
Show answer
Answer: A. Stop, yield to others, and go when it is clear
A flashing red signal works like a stop sign. You stop at the stop line (or before the crosswalk or intersection), yield, and proceed only when it is clear.
Handbook: Section 4.A: Traffic Signals
- You must never drive in that lane
- The lane is for left turns only
- The lane is open only for emergency vehicles
- You may use the lane but must slow down
Show answer
Answer: A. You must never drive in that lane
Lane use signals control reversible lanes. A red X means you must never drive in that lane. A steady yellow X means move out of the lane as soon as you safely can.
Handbook: Section 4.A: Traffic Signals
- You may not pass; drivers going the other way may pass with care
- Nobody may pass in either direction on this road
- You may pass with care; drivers going the other way may not
- You may pass only if you are going under the speed limit
Show answer
Answer: A. You may not pass; drivers going the other way may pass with care
On this marking, passing with care is allowed only for traffic on the side of the broken line. Traffic on the solid-line side must not pass.
Handbook: Section 4.C: Pavement Markings - Types of Line Markings
- Passing is not allowed in either direction
- The lanes are reversible
- Traffic in one direction may pass with care
- Passing is allowed on either side if the road is clear
Show answer
Answer: A. Passing is not allowed in either direction
A double solid yellow line separates traffic going in opposite directions and bans passing in both directions. You may still cross it to turn left, for example into a driveway.
Handbook: Section 4.C: Pavement Markings - Types of Line Markings
- Slow down and go through if no one is close to you
- Follow the car ahead of you through the intersection
- Go first if you are on the larger of the two roads
- Stop at the line, yield, and go when it is safe
Show answer
Answer: D. Stop at the line, yield, and go when it is safe
A dark signal means you must stop at a clear stop line (or before the crosswalk or intersection), yield to vehicles and pedestrians, and stay stopped until it is safe to go.
Handbook: Section 4: Signs, Signals and Pavement Markings - When a traffic signal is not working