Massachusetts permit test: signals and pavement markings
A steady red circle means stop. A flashing red circle works like a STOP sign. A steady yellow means the light is changing to red, so stop if it is safe. A flashing yellow circle is a warning, and a flashing yellow arrow lets you turn when there is a gap in oncoming traffic. A green arrow gives you a protected turn. If signals are dark, treat the intersection as a stop in all directions. When a Rectangular Rapid Flashing Beacon flashes, you must stop for pedestrians. White lines separate lanes that go the same way. A broken white line may be crossed to change lanes, and a double solid white line may not. Yellow lines separate opposing traffic. You may cross a broken yellow line to pass when it is safe. With one solid and one broken yellow line, only the driver next to the broken line may cross to pass. Two solid yellow lines may be crossed only to turn left. Stop behind the stop line, yield line or crosswalk line. At a red light, do not stop on green bicycle pavement.
Handbook: Chapter 4: Traffic Signals and Pavement Markings (pp. 81-91)
8 practice questions
- Slow down and keep going if no cars are coming from either side of the road
- Come to a complete stop and go only when it is safe under the right-of-way rules
- Treat it like a yield sign and stop only if another car is close to you
- Stop for three seconds, then go whether or not other cars have the right-of-way
Show answer
Answer: B. Come to a complete stop and go only when it is safe under the right-of-way rules
A flashing red circle means the same as a STOP sign. You stop at the line or crosswalk and then go when it is safe, giving the right-of-way as at any stop.
Handbook: Chapter 4: Motor Vehicle Signals (p. 82)
- The light is about to turn green, so you should speed up to cross the intersection
- The light is changing from green to red, and you must stop if it is safe to do so
- You have time to cross, so you should keep your speed and enter the intersection
- You must stop at once, even if a hard stop would put the cars behind you at risk
Show answer
Answer: B. The light is changing from green to red, and you must stop if it is safe to do so
A steady yellow means the signal is changing from green to red. You stop if you can do so safely. If you are already stopped at the line, you may not go.
Handbook: Chapter 4: Motor Vehicle Signals (p. 82)
- Turn in the arrow's direction and expect all oncoming cars to stop for you at once
- Turn in the arrow's direction after yielding when there is a gap in oncoming traffic
- Go straight through the intersection without yielding to any other vehicle
- Make a U-turn from any lane, because the signal protects you from oncoming cars
Show answer
Answer: B. Turn in the arrow's direction after yielding when there is a gap in oncoming traffic
A flashing yellow arrow lets you turn when oncoming traffic has a green light, but only if you judge there is an adequate gap and no pedestrians are in your path. It is not a protected turn.
Handbook: Chapter 4: Motor Vehicle Signals (p. 82)
- As if you have the right-of-way on the larger road
- As a yield intersection, where you slow and keep rolling
- As if there were a stop sign in every direction
- As a free intersection, where the fastest driver goes first
Show answer
Answer: C. As if there were a stop sign in every direction
If signals are blacked out and not working, you are to be cautious and proceed as though there is a stop sign in all directions, going only when it is safe.
Handbook: Chapter 4: Traffic Signals Not Working (p. 83)
- To pass a slow vehicle if the oncoming lane is clear
- To pass a slow vehicle, but only on a straight, level section
- To change lanes at any time after you have signaled
- Only to turn left when it is safe
Show answer
Answer: D. Only to turn left when it is safe
Two solid yellow lines prohibit crossing to pass another vehicle. You may cross them only to make a left turn when it is safe to do so.
Handbook: Chapter 4: Yellow Lane Lines (p. 90)
- You may cross the lines to pass whenever the road ahead is clear
- You may not cross the lines to pass
- You may cross only if a slow vehicle is in front of you
- You may cross the lines only when you are driving uphill
Show answer
Answer: B. You may not cross the lines to pass
When the solid yellow line is on your side of a double yellow pair, you cannot cross. Only the driver who has the broken line on his or her side may cross, and only to pass when it is safe.
Handbook: Chapter 4: Yellow Lane Lines (p. 90)
- The lanes carry traffic in opposite directions, so you may never cross the line at all
- The lane is reserved for buses and car pools, so you may not drive on it
- The lanes carry traffic in the same direction, and you may change lanes when it is safe
- You may cross it only if the vehicle ahead of you is slowing down to turn
Show answer
Answer: C. The lanes carry traffic in the same direction, and you may change lanes when it is safe
Broken white lines separate lanes of traffic going the same way. After you signal and check that it is safe, you may cross the line to change lanes.
Handbook: Chapter 4: White Lane Lines (p. 89)
- Speed up to clear the crosswalk before anyone steps out
- Honk to warn pedestrians and keep going slowly
- Yield only if a pedestrian is already in your lane
- Stop for pedestrians who are crossing
Show answer
Answer: D. Stop for pedestrians who are crossing
These lights are a Rectangular Rapid Flashing Beacon. A pedestrian triggers it, and you must stop for pedestrians while it is flashing.
Handbook: Chapter 4: Rectangular Rapid Flashing Beacon (p. 82)