Get the Pass

Minnesota permit test: signals and pavement markings

A steady red light means stop at the stop line, the crosswalk or the intersection. You may turn right on red after a full stop when traffic may travel that way and no No Turn on Red sign is posted. A flashing red light works like a stop sign. A steady yellow light means red is next, so stop if you can do so safely. A flashing yellow light means proceed with caution. A green arrow lets you turn in its direction with your turn protected from oncoming or crossing traffic. If a signal is not working, treat the intersection as uncontrolled. Never enter an intersection unless you can clear it without blocking cross traffic. On a freeway entrance ramp with a meter, one car may go on each green. Pavement markings: white lines separate traffic that moves the same way, and yellow lines separate traffic that moves in opposite directions. A solid yellow line on your side means no passing. Double solid yellow lines mean no passing in either direction. When an officer directs traffic, obey the officer, not the signals.

Handbook: Chapter 5: Signs, signals and pavement markings – Traffic-control signals; Pavement markings

8 practice questions

1. What must you do at a traffic signal that shows a flashing red light?
  1. Slow down and go on if no cars are visible in any direction
  2. Stop only if cross traffic is present at the intersection
  3. Treat it as a stop sign: stop, yield, then go when clear
  4. Treat it as a yield sign and go if the way is clear
Show answer

Answer: C. Treat it as a stop sign: stop, yield, then go when clear

A flashing red light works like a stop sign. You must come to a complete stop, yield to vehicles and pedestrians that reached the intersection first, and go when it is clear.

Handbook: Chapter 5: Signs, signals and pavement markings – Traffic-control signals

2. What does a steady yellow light mean?
  1. The signal is about to turn green, so get ready to go
  2. Speed up so you clear the intersection before it turns red
  3. Yield to cross traffic and then continue through the light
  4. The signal is about to turn red, so stop if you can do so safely
Show answer

Answer: D. The signal is about to turn red, so stop if you can do so safely

A steady yellow light warns that red is next. Do not enter the intersection if you can stop safely before it. If you cannot stop safely, go through with caution.

Handbook: Chapter 5: Signs, signals and pavement markings – Traffic-control signals

3. A traffic signal is not working. How should you treat the intersection?
  1. As a four-way stop only if you have a stop sign
  2. As an uncontrolled intersection
  3. As if the signal were flashing yellow
  4. As if the last color shown were still lit
Show answer

Answer: B. As an uncontrolled intersection

Minnesota tells you to treat an intersection with a dead signal like an uncontrolled intersection. Use the normal right-of-way rules, and expect other drivers to be unsure.

Handbook: Chapter 5: Signs, signals and pavement markings – Traffic-control signals

4. A solid yellow line is on your side of the center line of a two-lane road. What does it mean?
  1. You may pass if the road is clear
  2. You may pass only on a hill
  3. You must not pass in your lane
  4. It marks the edge of the road
Show answer

Answer: C. You must not pass in your lane

A solid yellow line on your side means you must not pass. A dashed yellow line on your side means you may pass when it is safe.

Handbook: Chapter 5: Signs, signals and pavement markings – Pavement markings

5. What do double solid yellow lines mean?
  1. Passing is allowed in either direction
  2. Passing is allowed only for the faster vehicle
  3. Passing is allowed only at night
  4. No passing in either direction
Show answer

Answer: D. No passing in either direction

Double solid yellow lines mean you must not pass, whichever side of the lines you are driving on. They are not a suggestion for slow traffic.

Handbook: Chapter 5: Signs, signals and pavement markings – Pavement markings

6. You see white dashes that are shorter and thicker than normal lane lines. What does this marking tell you?
  1. A bicycle lane is ahead
  2. Your lane is ending
  3. A school zone is ahead
  4. Passing is not allowed
Show answer

Answer: B. Your lane is ending

Shorter and thicker white dashes show that a lane is ending. Plan early to merge safely.

Handbook: Chapter 5: Signs, signals and pavement markings – Pavement markings

7. At a freeway entrance ramp, a ramp meter light is green. How many cars may go on each green?
  1. Two cars
  2. As many as will fit before it turns red
  3. One car
  4. One car in each lane, plus any bus
Show answer

Answer: C. One car

Only one car may go each time the ramp meter shows green. It is illegal to go through the red light.

Handbook: Chapter 5: Signs, signals and pavement markings – Freeway ramp meters

8. A police officer at an intersection signals you to go, but the traffic light is red. What must you do?
  1. Follow the officer's signal
  2. Wait for the light to turn green
  3. Follow the light because it is the law
  4. Stop and ask the officer which signal to obey
Show answer

Answer: A. Follow the officer's signal

When an officer is directing traffic, you obey the officer's hand signals instead of signals, signs or pavement markings.

Handbook: Chapter 5: Signs, signals and pavement markings – Traffic officers