Get the Pass

Mississippi permit test: signals and pavement markings

A broken yellow line separates traffic moving in opposite directions, and you may cross it only to pass when it is safe. A double solid yellow line means no passing from either side. If one solid and one broken yellow line are together, only the driver next to the broken line may pass. A broken white line separates lanes in the same direction. A double solid white line must not be crossed. On a red light you must stop. You may turn right on red only after a complete stop and only if no sign bans the turn. A solid green light means go if it is safe, but yield to pedestrians and to traffic already in the intersection. When you turn left on a solid green light or a flashing yellow arrow, you must yield to oncoming traffic. A green arrow gives you a protected turn. A flashing red light means stop and then proceed with caution. If the lights are dark, stop completely. Never drive in a lane that shows a red signal.

Handbook: Pavement Markings; Traffic Signal Lights

9 practice questions

1. A broken yellow line separates two lanes that move in opposite directions. When may you cross it?
  1. Any time you want to change lanes
  2. Never, because crossing any yellow line is illegal
  3. Only to pass, when it is safe to do so
  4. Only when you drive below 25 mph
Show answer

Answer: C. Only to pass, when it is safe to do so

A broken yellow line lets you cross into the oncoming lane only to pass, and only when the lane is clear and passing is safe.

Handbook: Pavement Markings: Lane Lines, Center Lines, and Barrier Lines

2. On a two-lane road there is a solid yellow line on your side and a broken yellow line on the other side. What can you do?
  1. You may pass if the road is clear
  2. You may pass only at night
  3. You may pass at any speed
  4. You may not pass
Show answer

Answer: D. You may not pass

The solid line closest to your lane means passing is forbidden. Only the driver next to the broken line may cross to pass.

Handbook: Pavement Markings: Lane Lines, Center Lines, and Barrier Lines

3. What does a double solid yellow line in the center of the road mean?
  1. Passing is allowed for slow vehicles
  2. Passing is prohibited from either side
  3. Passing is allowed for slow vehicles if no car is near
  4. Traffic goes the same direction
Show answer

Answer: B. Passing is prohibited from either side

A double solid yellow line separates lanes moving in opposite directions. You may never cross it to pass, even to pass a slow-moving car.

Handbook: Pavement Markings: Lane Lines, Center Lines, and Barrier Lines

4. The light is red and you want to turn right. No sign bans the turn. What must you do first?
  1. Slow down and turn if no cars are close enough
  2. Wait for the light to turn yellow before you make the turn
  3. Stop completely, then yield to traffic and pedestrians
  4. Honk to warn other drivers, then turn when clear
Show answer

Answer: C. Stop completely, then yield to traffic and pedestrians

The manual says you must come to a complete stop before you turn right on red. Only yielding before you turn is not enough and is illegal.

Handbook: Traffic Signal Lights

5. What does a flashing yellow arrow pointing left mean for a driver who wants to turn left?
  1. You have a protected turn and may go at once with no yield
  2. You must stop completely before you make the turn
  3. You must wait for a green light before you turn
  4. Turn if in the proper lane, but yield to oncoming traffic
Show answer

Answer: D. Turn if in the proper lane, but yield to oncoming traffic

A flashing yellow arrow lets you turn, but you do not have a protected turn. Oncoming traffic has a green light, so you must yield to it.

Handbook: Traffic Signal Lights

6. You come to an intersection where the signal light is flashing red. What must you do?
  1. Slow down and drive through if you see no cross traffic
  2. Stop completely, then go ahead with caution
  3. Stop only if other cars are coming
  4. Stop and wait for a green light
Show answer

Answer: B. Stop completely, then go ahead with caution

A flashing red light works like a STOP sign. You stop completely and then proceed with caution, yielding the right-of-way at the intersection.

Handbook: Traffic Signal Lights

7. The traffic signals at an intersection are dark because none of the lights work. What must you do?
  1. Slow down and keep moving
  2. Follow the car ahead of you
  3. Stop completely and proceed with caution
  4. Treat it like a flashing yellow light and slow down only
Show answer

Answer: C. Stop completely and proceed with caution

When no lights are working you must stop completely and then proceed with caution, following the rules for yielding at intersections.

Handbook: Traffic Signal Lights: Malfunctioning Lights

8. A signal over your lane shows a red light. The lanes beside yours show green lights. What does this mean?
  1. Your lane is closed and you must not use it
  2. Your lane is for turns only
  3. Your lane is open if the road ahead of you is clear
  4. Your lane is a passing lane
Show answer

Answer: A. Your lane is closed and you must not use it

Lane direction signals tell you which lanes are open. You may travel only in a lane marked with a green light and never in a lane marked with red.

Handbook: Lane Direction Control

9. A pedestrian signal is flashing. What should pedestrians who are still at the curb do?
  1. Cross quickly
  2. Cross if no cars are close
  3. Cross after one car passes
  4. Stay at the curb
Show answer

Answer: D. Stay at the curb

A flashing pedestrian sign means pedestrians must not leave the curb. Those already crossing when it began to flash should keep crossing.

Handbook: Pedestrian Crossing