Get the Pass

Montana permit test: signals and pavement markings

A steady red signal means stop before the stop line, the crosswalk, or the intersection. After you stop, you may turn right on red unless a sign forbids it, and you may turn left on red from a one-way street onto a one-way street. Yield to pedestrians and traffic first. A flashing red signal works like a stop sign. A steady yellow means the light is about to turn red, so enter only if you are too close to stop safely. A flashing yellow arrow lets you turn left after you yield to oncoming traffic. If a signal is out, stop as if every direction had a stop sign. On the road, a solid yellow line on your side means no passing. A double yellow line may not be crossed by traffic in either direction, except to make a left turn. A dashed yellow line on your side allows passing when safe. White lines separate lanes that go the same way. On reversible lanes, a green arrow means go and a red X means do not use the lane.

Handbook: Chapter 3: Signs, Signals, & Markings - Traffic Signals and Road Markings

8 practice questions

1. What must you do at a flashing red signal?
  1. Slow down and go on through if no cross traffic is visible
  2. Stop only if other vehicles or pedestrians are very close to you
  3. Stop completely, then go when it is safe, as at a stop sign
  4. Yield, then roll through slowly when the way looks clear
Show answer

Answer: C. Stop completely, then go when it is safe, as at a stop sign

A flashing red signal means the same as a stop sign. You must come to a complete stop, yield to traffic and pedestrians, and go only when it is safe.

Handbook: Chapter 3: Signs, Signals, & Markings - Traffic Signals

2. The light turns steady yellow as you approach an intersection. When may you enter it?
  1. Only if you are too close to stop safely
  2. Always, because yellow means speed up
  3. Only if no police car is in sight
  4. Never, you must always stop on yellow
Show answer

Answer: A. Only if you are too close to stop safely

Yellow warns that the signal is about to turn red. Do not enter against a steady yellow unless you are too close to stop safely.

Handbook: Chapter 3: Signs, Signals, & Markings - Traffic Signals

3. You see a flashing yellow arrow pointing left. What does it allow?
  1. A left turn after you yield to oncoming traffic and pedestrians
  2. A protected left turn, with oncoming traffic held at a red light
  3. A left turn only after a full stop and a wait of three seconds
  4. No left turn at all until the arrow becomes a steady green
Show answer

Answer: A. A left turn after you yield to oncoming traffic and pedestrians

A flashing yellow arrow means turns are allowed, but oncoming traffic has a green light. You must find a safe gap and yield to pedestrians before you turn.

Handbook: Chapter 3: Signs, Signals, & Markings - Traffic Signals

4. A traffic signal is not working at an intersection. How should you treat the intersection?
  1. Stop as you would if there were stop signs in all directions
  2. Treat it as a yield sign for traffic that is on the main road
  3. Go straight through if you see no other vehicle nearby at all
  4. Follow the driver ahead of you through the intersection
Show answer

Answer: A. Stop as you would if there were stop signs in all directions

Generally, if a signal is dark you stop as at an all-way stop. The driver who stops first goes first, but stay cautious even then.

Handbook: Chapter 3: Signs, Signals, & Markings - Traffic Signals

5. What does a double solid yellow line in the center of the road mean?
  1. Traffic in neither direction may cross it to pass
  2. You may cross it when the road ahead is clear
  3. Only trucks must stay behind it
  4. Passing is allowed in your direction only
Show answer

Answer: A. Traffic in neither direction may cross it to pass

A double yellow line may not be crossed by traffic moving in either direction. Crossing a solid centerline is permitted only as part of a left turn.

Handbook: Chapter 3: Signs, Signals, & Markings - Road Markings

6. The center of a two-lane road has a solid yellow line on your side and a dashed yellow line on the other side. What does this tell you?
  1. You may not pass
  2. You may pass if it is safe
  3. Both directions may pass
  4. Only the oncoming lane is a one-way lane
Show answer

Answer: A. You may not pass

When a solid and a dashed yellow line are together, you may not pass if the solid line is on your side. The driver on the dashed side may pass when it is safe.

Handbook: Chapter 3: Signs, Signals, & Markings - Pavement Markings

7. What color are the lines that separate lanes of traffic moving in the same direction?
  1. Yellow
  2. Red
  3. Orange
  4. White
Show answer

Answer: D. White

White lines separate traffic moving the same way, and yellow lines separate traffic moving in opposite directions. A dashed white line may be crossed to change lanes when it is safe.

Handbook: Chapter 3: Signs, Signals, & Markings - Pavement Markings

8. A red X is lit above a lane on a road with reversible lanes. What does it mean?
  1. The lane is open for turning only
  2. The lane is open to buses only
  3. You may not use that lane
  4. Use that lane with caution
Show answer

Answer: C. You may not use that lane

A green arrow means you may use the lane beneath it, and a red X means you may not. A flashing yellow X means turning only, and a steady yellow X means the lane use is changing.

Handbook: Chapter 3: Signs, Signals, & Markings - Other Lane Controls