Nevada permit test: signals and pavement markings
A red light means stop behind the stop line or crosswalk. You may turn right on red after a complete stop unless a sign forbids it, and you must yield to pedestrians and traffic. A left turn on red is allowed only from a one-way street onto a one-way street with traffic moving left. A steady yellow warns that red is coming. If you have not entered the intersection, you must stop. A flashing red light works like a stop sign. A flashing yellow means proceed with caution. A flashing yellow arrow means you may turn left after you yield to oncoming traffic and pedestrians. When traffic lights are out, stop fully before you go through. Broken white lines mark lanes where passing is allowed when safe. Solid white lines between same-direction lanes mean do not change lanes or pass. Yellow lines separate opposing traffic. A solid yellow line on your side means no passing. In a center left-turn lane you may travel no more than 200 feet before you turn left, and no more than 50 feet after turning onto the road before you merge.
Handbook: Chapter 3: Signs, Signals and Markings – Signals and Highway Markings
9 practice questions
- Turn without stopping if you signal and no cars are coming
- Stop completely, signal, and turn when pedestrians and traffic are clear
- Wait until the light turns green, because right turns on red are banned
- Turn on red only from the left lane, after a full stop
Show answer
Answer: B. Stop completely, signal, and turn when pedestrians and traffic are clear
Where no sign prohibits it, you may turn right on red after a complete stop. You must signal and wait until pedestrians and cross traffic are clear. A rolling turn is not allowed.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals
- Speed up to get through before the light turns red
- Stop only if other cars are close behind you
- Stop, since you have not yet entered the intersection
- Keep going at the same speed, since yellow means proceed
Show answer
Answer: C. Stop, since you have not yet entered the intersection
A steady yellow warns that the light will turn red. If you have not entered the intersection, you must stop. If you are already in it, keep moving and clear it. Never speed up to beat the light.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals
- Slow down and go through with caution, as for a flashing yellow
- Go through, because the signal is probably broken
- Stop only if a pedestrian is crossing in front of you
- Treat it like a stop sign: stop, then go when it is clear
Show answer
Answer: D. Treat it like a stop sign: stop, then go when it is clear
A flashing red light has the same meaning as a stop sign. You must come to a full stop and go only when the road is clear and you have the right-of-way. A flashing yellow means proceed with caution.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals
- Turn right away, because the arrow protects your turn
- Yield to oncoming traffic and pedestrians, then turn when safe
- Stop and wait for a solid green arrow before you move
- Turn only after an oncoming driver waves you through
Show answer
Answer: B. Yield to oncoming traffic and pedestrians, then turn when safe
A flashing yellow arrow means you may turn, but you must yield to oncoming traffic and pedestrians first. A solid green arrow is the signal that protects the turn.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals
- Treat the intersection as a yield and go if it looks clear
- Follow the car ahead of you through the intersection
- Stop fully, yield to others already there, then go with caution
- Slow down and drive through without stopping if no one is near
Show answer
Answer: C. Stop fully, yield to others already there, then go with caution
When traffic control lights are out, every driver must come to a full stop before entering the intersection. After yielding to those already stopped or in the intersection, you may go with caution.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals
- You may pass if no cars are coming
- You must drive on the shoulder
- The road ahead is a divided highway
- You may not cross it to pass
Show answer
Answer: D. You may not cross it to pass
Solid yellow lines mean you are not to cross over or pass. Broken yellow lines allow passing when it is safe. With double yellow lines, you cannot pass if the line on your side is solid.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Highway Markings
- Passing is allowed when it is safe
- Do not change lanes or pass here
- The lane to your left is for turns only
- The lanes are reserved for carpools
Show answer
Answer: B. Do not change lanes or pass here
A solid white line between same-direction lanes means do not change lanes or pass. A broken white line allows lane changes when safe.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Highway Markings
- No more than 1,000 feet
- As far as you like, to pass slow traffic
- No more than 200 feet
- No more than 20 feet
Show answer
Answer: C. No more than 200 feet
Drivers may not travel more than 200 feet in a center turn lane before making a left turn. These lanes are not travel lanes and may not be used for passing.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Highway Markings
- From a one-way street onto a one-way street with traffic moving left, after stopping and yielding
- Whenever the road is clear in every direction, after a short pause
- From any two-way street onto a one-way street, after stopping
- Never, in any situation on a Nevada road
Show answer
Answer: A. From a one-way street onto a one-way street with traffic moving left, after stopping and yielding
A left turn on red is allowed only from a one-way street onto another one-way street whose traffic moves to the left. You must signal, stop completely, and yield, and no sign or officer may forbid it.
Handbook: Chapter 3: Driving Safely – Signs, Signals and Markings – Signals