Get the Pass

Nevada permit test: turns and lanes

Signal at least 100 feet before a turn or lane change on city streets, and 300 feet on open highways and freeways. For a right turn, start in the extreme right lane or a lane marked for right turns, and turn into the right lane of the road you enter. For a left turn, keep your wheels straight until you start to turn. Use the lane just right of the center line on a two-way road and finish in the nearest lane going your way. Do not change lanes in an intersection. Never make a U-turn at a railroad crossing, on a one-way street, where you cannot see 200 feet in each direction, or where a No U-turn sign is posted. On two-lane roads, pass on the left only where there is a broken yellow line and a clear view. Do not pass within 100 feet of a street crossing or a railroad crossing. You may never use the shoulder to pass, and you may never exceed the speed limit to pass. You may pass on the right only on roads with two or more lanes in your direction, and only when it is safe.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

9 practice questions

1. How far ahead of a turn must you signal on a city street?
  1. At least 10 feet
  2. At least 100 feet
  3. At least 300 feet
  4. At least 1,000 feet
Show answer

Answer: B. At least 100 feet

Signal at least 100 feet ahead on city streets (about 10 car lengths). On open highways the distance is 300 feet.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

2. On an open highway, how far before a lane change should you signal?
  1. 300 feet
  2. 100 feet
  3. 50 feet
  4. 30 feet
Show answer

Answer: A. 300 feet

The handbook says to signal 300 feet (about 30 car lengths) ahead on highways or freeways. On city streets 100 feet is the minimum.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

3. You are making a right turn at an intersection. Which lane must you start from?
  1. The extreme right lane or a lane marked for right turns
  2. Any lane you like, as long as you signal early enough
  3. The center lane first, then move right once you are inside the turn
  4. The left lane, so you can see the pedestrians better
Show answer

Answer: A. The extreme right lane or a lane marked for right turns

When turning right, you must be in the extreme right-hand travel lane or a lane designated for right turns. Turn into the right-hand lane of the road you are entering.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

4. You are about to turn left. What should you do with your front wheels while you wait?
  1. Pointed left, so you are ready to move as soon as it is clear
  2. Turned right, so you will not be pushed into oncoming cars
  3. Straight ahead, until you actually begin the turn
  4. Turned toward the curb, so you can stop quickly
Show answer

Answer: C. Straight ahead, until you actually begin the turn

Keep your wheels pointed straight ahead until you actually begin to complete the turn. On a two-way road, use the lane just right of the center line and finish in the nearest lane going your way.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

5. Where is it illegal to change lanes?
  1. On a multi-lane city street in light traffic
  2. On a multi-lane road, after you check your mirrors and blind spot
  3. On a road with broken white lines
  4. In an intersection
Show answer

Answer: D. In an intersection

The handbook says not to change lanes in an intersection. Lane changes are legal where lines are broken and it is safe, after you check mirrors and blind spots.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

6. Which of these is a place where you must never make a U-turn?
  1. At an intersection on a green light with no sign
  2. Across a double yellow line when safe and legal
  3. At or on a railroad crossing
  4. From the far left lane at a signal where it is allowed
Show answer

Answer: C. At or on a railroad crossing

Never make a U-turn at or on a railroad crossing. You also may not make one where you cannot see 200 feet in each direction, on a one-way street, or where a No U-turn sign is posted.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

7. On a two-lane road, how close to a railroad crossing may you pass another vehicle?
  1. You may pass 50 feet away
  2. You may pass anywhere if the road is clear
  3. You may not pass at or within 100 feet of it
  4. You may pass 10 feet away at low speed
Show answer

Answer: C. You may not pass at or within 100 feet of it

You must not pass at or within 100 feet of a street crossing or a railroad crossing. You also may not pass on curves, hilltops, or where a double solid yellow line or sign forbids it.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

8. May you use the road shoulder to pass another car on a Nevada highway?
  1. No, you may never use the shoulder to pass
  2. Yes, if the car ahead is slow
  3. Yes, if you signal
  4. Yes, on rural highways only
Show answer

Answer: A. No, you may never use the shoulder to pass

You should never exceed the speed limit to pass and you may never use the shoulder to pass. Passing on the right is allowed only on roads with two or more lanes in your direction, when it is safe.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing

9. Your brake lights and turn signals are not working. How do you signal a right turn by hand?
  1. Extend your left arm with the elbow bent upward at about 90 degrees
  2. Extend your left arm straight out of the open window
  3. Extend your left arm downward with the palm of your hand facing back
  4. Extend your right arm out of the passenger window
Show answer

Answer: A. Extend your left arm with the elbow bent upward at about 90 degrees

For a right turn, extend your left arm out with the elbow bent upward at about a 90-degree angle. A straight arm signals a left turn, and an arm pointing down signals slowing or stopping.

Handbook: Chapter 3: Driving Safely – Signaling, Turning, Lane Changes, and Passing