Get the Pass

New Hampshire permit test: signals and pavement markings

A solid green light lets you go if the way is clear, and you must still yield to people and vehicles in the intersection. Yellow warns that red is next. Solid red means stop behind the stop line, crosswalk or intersection. In New Hampshire you may turn right on red only if no sign bans it. A flashing yellow means slow down and be ready to stop. A flashing red means stop completely, then go when it is safe. A green arrow lets you turn that way after you yield. A red arrow bars entry unless another signal allows it. A yellow arrow means go with caution. A police officer directing traffic overrules every light and sign. White lane lines separate traffic that moves the same way, and yellow lines separate opposing traffic. A solid white line bans lane changes and passing. On double lines, you may not pass if the line on your side is solid. Edge lines are white, except on the left edge of a one-way road, where they are yellow. Shared center lanes are for left turns only.

Handbook: Section 6: Rules of the Road - Traffic Signals; Pavement Markings

8 practice questions

1. What must you do at a flashing red traffic light?
  1. Slow down and go through the intersection if no one is coming
  2. Stop only if other vehicles are close to the intersection
  3. Stop fully, then go when safe, yielding as needed
  4. Stop for three seconds and then turn right only
Show answer

Answer: C. Stop fully, then go when safe, yielding as needed

A flashing red light works like a stop sign. You must come to a full stop before the stop line or crosswalk and yield as needed.

Handbook: Section 6: Rules of the Road - Traffic Signals

2. What does a flashing yellow traffic light mean?
  1. Slow down and go on with caution
  2. Stop completely and then go when it is clear
  3. The light is about to turn red
  4. Do not enter the intersection
Show answer

Answer: A. Slow down and go on with caution

A flashing yellow is a caution signal. Slow down and be ready to stop for traffic that enters the intersection.

Handbook: Section 6: Rules of the Road - Traffic Signals

3. You face a steady red arrow. What does it mean?
  1. Do not enter unless another signal permits it
  2. Turn in the arrow direction after you yield
  3. Slow down and go on with caution
  4. Stop for pedestrians and then go ahead
Show answer

Answer: A. Do not enter unless another signal permits it

A red arrow bans entry to the intersection. A green arrow, not a red one, lets you turn after yielding, and a yellow arrow means caution.

Handbook: Section 6: Rules of the Road - Traffic Signals

4. When may you turn right on a red light in New Hampshire?
  1. When no sign forbids a right turn on red
  2. Only when a green arrow is also lit
  3. Only when no cars are in sight and it is night
  4. Never, unless a police officer allows it
Show answer

Answer: A. When no sign forbids a right turn on red

New Hampshire allows a right turn on red only if no sign prohibits it. A No Turn on Red sign overrides this rule.

Handbook: Section 6: Rules of the Road - Traffic Signals (red signal exception)

5. What does a solid white line on the road tell you?
  1. Do not change lanes or pass
  2. You may pass when it is safe
  3. Traffic in the lane moves in the opposite direction
  4. The road is about to end
Show answer

Answer: A. Do not change lanes or pass

A solid white line bans lane changes and passing. A broken white line allows both when it is safe.

Handbook: Section 6: Rules of the Road - Pavement Markings

6. Double yellow lines mark the center of the road. The line on your side is solid and the other line is broken. What may you do?
  1. Not pass, because your side is solid
  2. Pass if it is safe, because the other line is broken
  3. Pass only at night when no cars are in sight
  4. Pass only a slow vehicle, such as a farm tractor
Show answer

Answer: A. Not pass, because your side is solid

The line on your side decides. If it is solid you must not pass, and if it is broken you may pass when it is safe.

Handbook: Section 6: Rules of the Road - Pavement Markings

7. What does a yellow line on the left edge of a roadway mean?
  1. The center of a two-way road
  2. A bicycle lane on the right edge
  3. A no-parking zone at the curb
  4. The left edge of a one-way road
Show answer

Answer: D. The left edge of a one-way road

A single yellow edge line marks the left edge of a one-way road. Edge lines on two-way roads and on the right edge of one-way roads are white.

Handbook: Section 6: Rules of the Road - Pavement Markings, Edge Markings

8. A police officer directs traffic at an intersection where the light is green. Whom do you obey?
  1. The traffic light
  2. The vehicle ahead of you
  3. The police officer
  4. Whichever signal lets you go first
Show answer

Answer: C. The police officer

An officer who directs traffic overrules any light or sign. You must follow the officer's directions.

Handbook: Section 6: Rules of the Road - New Hampshire Rules of the Road