New Jersey permit test: signals and pavement markings
A red light means stop before the intersection or crosswalk and stay stopped until it turns green. A yellow light means stop, unless you are so close that you cannot stop safely. A green arrow means go only in the direction shown, and yield to pedestrians. A flashing yellow light means slow down and proceed with care. A flashing red light means stop, yield to traffic and pedestrians, and go only when it is safe. A signal that is dark because of a power failure is treated as a four-way stop. A police officer can overrule a signal, and you must obey the officer. On the road, yellow center lines separate traffic that moves in opposite directions, and white lines separate traffic that moves the same way. A solid line on your side of the center line means do not pass. A broken line on your side means you may pass when it is safe, but you must finish before the line turns solid. A single solid white line across the road is the stop line. White crosswalk lines show where pedestrians cross.
Handbook: Chapter 11: Appendix: Driver Safety – Traffic Signals; Road Markings
8 practice questions
- Slow down and go through if no one is coming
- Stop only if other cars are waiting to cross
- Stop, yield to traffic, and go when it is safe
- Treat it like a green light and keep your speed
Show answer
Answer: C. Stop, yield to traffic, and go when it is safe
A flashing red light works like a STOP sign. You must come to a stop and yield, then go when it is safe. Slowing down is not enough.
Handbook: Chapter 11: Appendix: Driver Safety – Traffic Signals: Flashing Red Light
- Stop and wait for it to turn green
- Stop only if a pedestrian is crossing
- Slow down and proceed with care
- The signal is about to turn red
Show answer
Answer: C. Slow down and proceed with care
A flashing yellow light is a caution signal. You do not have to stop, but you must slow down and watch for traffic and pedestrians. The steady yellow light is the one that means the signal is about to turn red.
Handbook: Chapter 11: Appendix: Driver Safety – Traffic Signals: Flashing Amber/Yellow Light
- Like a four-way stop
- Like an uncontrolled intersection where you may keep your speed
- Like a yield sign for traffic on the main road only
- Like a green light if you were already moving
Show answer
Answer: A. Like a four-way stop
A signal that is dark is treated as a four-way stop. Every driver must stop, look left and right, and go only when it is safe. Do not assume the other drivers will stop for you.
Handbook: Chapter 4: Safe Driving Rules and Regulations – Intersections: Uncontrolled; Chapter 11: Appendix: Driver Safety – Unlit Signal
- Yes, if the road ahead is clear of oncoming traffic
- Yes, if the vehicle ahead is driving slowly
- Yes, but only if you stay under the speed limit
- No. You may pass only on the side that has the broken line
Show answer
Answer: D. No. You may pass only on the side that has the broken line
When one center line is solid and one is broken, you may pass only if the broken line is on your side. A solid line on your side means no passing. Finish any pass before the line turns solid.
Handbook: Chapter 4: Safe Driving Rules and Regulations – Passing
- Where a lane ends and traffic must merge left
- Where the legal speed limit changes on the road
- Where you must stop for a signal or STOP sign
- Where parking begins along the side of the road
Show answer
Answer: C. Where you must stop for a signal or STOP sign
A single solid white line across the road is a stop line. You must stop behind it for a traffic signal or a sign. Stopping past the line can put you in the path of crossing traffic and pedestrians.
Handbook: Chapter 4: Safe Driving Rules and Regulations – Intersections; Chapter 11: Appendix: Driver Safety – Road Markings: White Stop Lines
- Stop before you enter the intersection
- Speed up and cross before the light turns red
- Slow down but keep going through
- Stop only if cars are already crossing
Show answer
Answer: A. Stop before you enter the intersection
A yellow light after green means stop before the intersection unless you are too close to stop safely. Speeding up to beat the red is how many signal crashes begin. If you are already in the intersection, drive through with caution.
Handbook: Chapter 4: Safe Driving Rules and Regulations – Stopping Regulations
- Stop and wait for the signal to turn green
- Follow the signal because it is the law
- Go only if the other drivers also have a red light
- Follow the officer's directions
Show answer
Answer: D. Follow the officer's directions
A police officer can overrule traffic signals, and you must always obey an officer's directions. Failing to follow an officer's direction is a moving violation.
Handbook: Chapter 11: Appendix: Driver Safety – Introduction to Signs, Signals and Markings
- They separate traffic that moves in opposite directions
- They mean that passing is never allowed in the lane
- They separate lanes of traffic going the same way
- They mark lanes that are reserved for buses only
Show answer
Answer: C. They separate lanes of traffic going the same way
White lines separate traffic going the same way and show the edges of the road. Yellow center lines separate traffic going in opposite directions.
Handbook: Chapter 11: Appendix: Driver Safety – Road Markings