New Mexico permit test: signals and pavement markings
A steady green light means go if it is safe, but you must yield to emergency vehicles and let cross traffic clear. When you turn left on a green light, oncoming traffic has the right-of-way. A steady yellow light means the light is about to turn red. Stop if it is safe, and continue if you are already in the intersection. A flashing yellow light means slow down and use caution. A steady red light means stop. You may turn right on red after a full stop if it is safe and no sign bans the turn. A flashing red light means the same as a stop sign. A red arrow means you cannot go in that direction. Yellow lines separate traffic moving in opposite directions, and white lines separate lanes that travel the same way. If a solid yellow line is on your side of a solid and dashed pair, you may not pass. Two solid yellow lines mean neither side may pass. A dashed white line lets you change lanes when it is safe.
Handbook: Rules of the Road – Traffic Signals; Pavement Markings (pp. 3–8)
8 practice questions
- The same as a stop sign: stop, then go when safe
- Slow down and proceed with caution through the intersection
- Stop only if other traffic is coming from another direction
- The signal is broken, so you may drive straight through it
Show answer
Answer: A. The same as a stop sign: stop, then go when safe
A flashing red light means the same as a stop sign. You must come to a full stop and may go only when it is safe. A flashing yellow light is the one that means slow down and use caution.
Handbook: Traffic Signals (p. 4)
- Slow down and proceed with caution
- Stop and then proceed when safe
- The light is about to turn red
- Cross traffic has the right-of-way
Show answer
Answer: A. Slow down and proceed with caution
A flashing yellow light tells you to slow down and use caution. It does not require a stop.
Handbook: Traffic Signals (p. 4)
- Green arrow protection is ending, so be ready to yield to oncoming traffic
- You may complete the turn without yielding to oncoming traffic
- The signal is about to turn green again for the same turn
- You must stop immediately, even if you are in the intersection
Show answer
Answer: A. Green arrow protection is ending, so be ready to yield to oncoming traffic
A yellow arrow means the protection of the green arrow is ending. Be ready to stop, and yield to oncoming traffic before you turn.
Handbook: Traffic Signals (p. 4)
- After a full stop, if it is safe and no sign bans it
- Never, because a red light always means wait for green
- Without stopping, as long as no other vehicle is coming
- Only after the cross traffic has also been given a red light
Show answer
Answer: A. After a full stop, if it is safe and no sign bans it
In New Mexico you may turn right on red after coming to a full stop, if it is safe and no sign prohibits it. Watch for pedestrians crossing in front of you.
Handbook: Traffic Signals (p. 4); Intersections (p. 16)
- You may not pass
- You may pass if the road ahead is clear
- You may pass only at night
- You may pass, and so may the oncoming drivers
Show answer
Answer: A. You may not pass
If the solid yellow line is on your side, you may not pass. Only the driver on the dashed side may pass, and only when it is safe.
Handbook: Pavement Markings – Yellow lane markings (p. 8)
- Traffic on both sides may pass when it is safe
- The lanes are for buses only
- Passing is allowed for one side at a time
- Neither side may pass
Show answer
Answer: D. Neither side may pass
Two solid yellow lines mean neither direction may pass. You may cross a solid yellow line only to turn into a driveway when it is safe.
Handbook: Pavement Markings – Yellow lane markings (p. 8)
- You may never change lanes here
- Passing is not allowed in either lane
- You may change lanes if it is safe
- The lanes are reserved for special vehicles
Show answer
Answer: C. You may change lanes if it is safe
A dashed white line between lanes of traffic means you may cross it to change lanes when it is safe. A solid white line means stay in your lane unless a special situation requires a change.
Handbook: Pavement Markings – White lane marking (p. 8)
- You may use the lane only to turn
- The lane is changing and you should leave it soon
- You may use the lane if you drive slowly
- You may not use that lane
Show answer
Answer: D. You may not use that lane
On reversible lanes a green arrow means you may use the lane and a red X means you may not. A flashing yellow X is for turning only, and a steady yellow X means the lane is changing.
Handbook: Other Lane Controls – Reversible Lanes (p. 9)