Get the Pass

North Carolina permit test: signals and pavement markings

A circular green light lets you go with care, and turning drivers must yield to oncoming traffic and pedestrians. A steady yellow means the light is about to turn red. Stop unless you are too close to stop safely, and never speed up to beat the red. At a steady red you stop, and you may turn right after a full stop unless a NO TURN ON RED sign is posted. Failing to yield to a pedestrian while turning right on red can bring a penalty of $100 to $500. A flashing red light works like a stop sign, and a flashing yellow light means slow down and proceed with care. A flashing yellow arrow lets you turn, but you must yield to oncoming traffic and pedestrians. If a signal is out, treat the intersection as an all-way stop. Yellow lines separate traffic moving in opposite directions, and white lines separate lanes moving the same way. You cannot cross continuous double solid yellow lines to pass in either direction. A two-way left-turn lane is for turns only, not for passing or merging.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals and Pavement Markings

8 practice questions

1. What should you do when you see a steady yellow light?
  1. Stop, unless you are too close to stop safely
  2. Speed up so that you pass before it turns red
  3. Always stop, even if you are in the intersection
  4. Treat it the same as a green light and go on
Show answer

Answer: A. Stop, unless you are too close to stop safely

A steady yellow signal means caution because the light is about to turn red. Stop unless you are too close to stop safely, and never speed up to beat the red light.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals

2. When may you turn right at a steady red light?
  1. Never, because red always means stay stopped
  2. Only if no cars are in sight, without stopping
  3. After a full stop, if no sign forbids it
  4. Only after you flash your lights at traffic
Show answer

Answer: C. After a full stop, if no sign forbids it

Unless a NO TURN ON RED sign is posted, you may turn right after coming to a complete stop. You must yield to other traffic and to pedestrians who are using or starting to cross in the intersection.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals

3. What does a flashing red signal mean?
  1. Slow down and keep going if the road is clear
  2. The same as a stop sign
  3. The signal is broken, so go through with care
  4. Stop only if you see a car coming toward you
Show answer

Answer: B. The same as a stop sign

A flashing red signal has the same meaning as a stop sign. Stop and do not move until you can enter the intersection without interfering with other traffic.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals - Flashing Signals

4. You face a flashing yellow arrow while you wait to turn left. What does it mean?
  1. You have a protected turn and need not yield to anyone
  2. You may turn, but must yield to oncoming traffic
  3. You must stop and wait for a solid green arrow
  4. You may not turn left, and must go straight
Show answer

Answer: B. You may turn, but must yield to oncoming traffic

A flashing yellow arrow allows the turn, but you must first yield to oncoming traffic and pedestrians. A solid green arrow is the signal that protects your turn.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals - Flashing Yellow Arrow Traffic Signal Heads

5. A traffic light has stopped working because of a power outage, and no officer is directing traffic. How should you treat the intersection?
  1. As if you have the right-of-way on the larger road
  2. As if it had a stop sign on every approach
  3. As if it were a yield sign on every approach
  4. As if it were a flashing yellow light
Show answer

Answer: B. As if it had a stop sign on every approach

When a signal fails, approach and proceed as though a stop sign controls every approach to the intersection. This does not apply if an officer or another traffic-control device is in use.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Traffic Signals

6. A road has a center line of double solid yellow lines. What does this mean?
  1. You may pass if the road ahead is clear for 500 feet
  2. Passing is allowed only for vehicles going slowly
  3. The lines mark the right edge of the road
  4. You may not cross them to pass in either direction
Show answer

Answer: D. You may not cross them to pass in either direction

Continuous double solid yellow center lines mean that no one may cross them to pass, in either direction. Passing is never safe where they appear.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Pavement Markings

7. What do white lines on the road separate?
  1. Lanes that carry traffic in opposite directions
  2. Lanes that carry traffic in the same direction
  3. The road from a driveway
  4. Parking spaces from bicycle lanes
Show answer

Answer: B. Lanes that carry traffic in the same direction

Yellow lines separate lanes moving in opposite directions, and white lines separate lanes moving in the same direction. A single solid white line also marks the right edge of the road.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Pavement Markings

8. What is the center two-way left-turn lane on a multi-lane road used for?
  1. Passing a slow vehicle when the road is clear
  2. Left turns in both directions, not passing
  3. Merging into traffic from a driveway or side road
  4. Driving at a higher speed than other traffic
Show answer

Answer: B. Left turns in both directions, not passing

The two-way left-turn lane is reserved for left turns in both directions. It must not be used for passing another vehicle or for merging into traffic.

Handbook: Chapter 5: Signals, Signs and Pavement Markings - Pavement Markings