Ohio permit test: turns and lanes
Give a turn signal at least 100 feet before a turn, using a mechanical signal or hand and arm signal. Turn right from the right-most part of your lane into the right-most part of the street you enter. Turn left from the left-most part of your lane into the lane furthest left, just right of the center line. Yield to oncoming traffic and pedestrians. You may turn right on red unless a sign forbids it, but only after a full stop and after crossing traffic and pedestrians clear. You may turn left on red only from the far left lane of a one-way street onto another one-way street. On a road with four or more lanes, drive in the right lane. Before you change lanes, check mirrors and blind spots, signal and look again. To pass, continue until you can see both headlights of the passed vehicle in your mirror. Do not pass at intersections, before a railroad crossing or bridge, on a hill or curve, or when oncoming traffic is near. Never pass on the shoulder.
Handbook: Section 5: Learning to Drive - Intersections and Turning, Lane Travel, Changing Lanes, Passing (pp. 16-21)
8 practice questions
- At least 50 feet
- At least 200 feet
- At least 100 feet
- At least 500 feet
Show answer
Answer: C. At least 100 feet
A turn signal must be given at least 100 feet before the intended turn. It can be a mechanical signal or the appropriate hand and arm signal.
Handbook: Section 5: Learning to Drive - Intersections and Turning, Turn Signal (p. 17)
- Without stopping, as long as no cars or people are near you
- Only after a full stop, and if no sign forbids it
- Only when you have a green arrow signal
- Never, because turns on red are not allowed here
Show answer
Answer: B. Only after a full stop, and if no sign forbids it
You may turn right on red unless a sign prohibits it. You must come to a complete stop and let all crossing traffic and all pedestrians clear before you go.
Handbook: Section 5: Learning to Drive - Turning on a Red Traffic Signal (p. 17)
- From any left-turn lane at a signal
- From a two-way road onto a one-way road
- From any lane, whenever the road looks clear in both directions
- From the far left lane of a one-way onto another one-way
Show answer
Answer: D. From the far left lane of a one-way onto another one-way
Ohio allows a left turn on red only from the extreme left lane of a one-way street onto another one-way street, unless a sign forbids it.
Handbook: Section 5: Learning to Drive - Turning on a Red Traffic Signal (p. 17)
- The lane furthest left, right of the center line
- The lane furthest right of the street
- Whichever lane is open, as long as you signal early
- The center turn lane, whenever one is marked
Show answer
Answer: A. The lane furthest left, right of the center line
Turn left from the left-most part of your lane into the lane furthest left, just to the right of the center dividing line of the street you are entering. This also applies to four-lane highways.
Handbook: Section 5: Learning to Drive - Intersections and Turning, Left Turns (p. 17)
- The first exit
- The second exit
- The third exit
- The fourth exit
Show answer
Answer: B. The second exit
The Digest says to use the first exit to turn right, the second to go straight, the third to turn left and the fourth to make a U-turn. Do not stop or change lanes inside the roundabout.
Handbook: Section 5: Learning to Drive - Roundabouts or Traffic Circles (p. 18)
- As soon as your front bumper passes theirs
- Before you signal your return to the lane
- Once you see both its headlights in your mirror
- When the other driver flashes the headlights at you
Show answer
Answer: C. Once you see both its headlights in your mirror
Continue to pass until you can see both headlights of the passed vehicle in the rear-view mirror. Then signal your intent and steer smoothly back into the lane.
Handbook: Section 5: Learning to Drive - Passing (p. 20)
- On a multi-lane road with no traffic
- On a road with a broken yellow line in your lane
- On a straight road with no hills
- Before a railroad crossing or a bridge
Show answer
Answer: D. Before a railroad crossing or a bridge
The Digest says not to pass when an oncoming vehicle is approaching, when a curve or hill blocks your view, at intersections, and before a highway-railroad crossing or bridge.
Handbook: Section 5: Learning to Drive - Passing (p. 20)
- Only the rear-view mirror
- Your mirrors and blind spots
- Only your outside mirrors
- Nothing, if you use your signal
Show answer
Answer: B. Your mirrors and blind spots
Check your mirrors and your blind spots, which mirrors cannot show, by turning your head in the direction you plan to move. Then find a gap, signal and look again before you move.
Handbook: Section 5: Learning to Drive - Changing Lanes (p. 19)