Get the Pass

Pennsylvania permit test: signals and pavement markings

A vertical signal has red on top and green on the bottom. A horizontal signal has red on the left. A steady yellow light means red is next. Slow down and stop, unless you are already in the intersection or cannot stop safely. You may turn right on red after a full stop, if no sign forbids it, and you must yield to pedestrians and traffic. You may turn left on red only from the left lane of a one-way street onto another one-way street. A flashing red light works like a STOP sign. A flashing yellow light means slow down and proceed with care. A flashing yellow arrow lets you turn, but you must yield to oncoming traffic and pedestrians. A dark signal is a four-way stop. A steady red X over a lane means you may not use it. A double solid yellow centerline bans passing both ways. A solid yellow line on your side of a broken line also bans passing. Yellow lines split opposing traffic, and white lines split traffic going the same way.

Handbook: Chapter 2: Signals (pp. 7-9); Pavement Markings (p. 22)

8 practice questions

1. What must you do at a flashing red traffic light?
  1. Stop completely, then go only when the intersection is clear
  2. Slow down and go through with caution, without stopping
  3. Stop only if you see cross traffic at the light
  4. Go through, because a flashing red light means the signal is broken
Show answer

Answer: A. Stop completely, then go only when the intersection is clear

A flashing red light has the same meaning as a STOP sign. You must stop completely, look both ways, and go only when the intersection is clear. Slowing without stopping is the rule for a flashing yellow light, not a flashing red one.

Handbook: Chapter 2: Flashing Signals (p. 8)

2. What does a flashing yellow left-turn arrow mean?
  1. Your turn is protected, because oncoming traffic is stopped by a red light
  2. Stop and wait for a green arrow before you make the turn
  3. The left-turn lane is closed and you must go straight
  4. You may turn left after you yield to oncoming traffic and pedestrians
Show answer

Answer: D. You may turn left after you yield to oncoming traffic and pedestrians

A flashing yellow arrow allows the turn, but the turn is not protected because oncoming traffic has a green light. Only a steady green arrow gives you a protected turn.

Handbook: Chapter 2: Flashing Signals and Red, Yellow and Green Traffic Lights and Arrows (pp. 7-8)

3. You come to an intersection where the traffic lights are completely dark because of a power failure. How should you treat it?
  1. As a yield sign for your direction only
  2. As if you have a green light when you are on the larger road
  3. As a four-way stop
  4. As a flashing yellow light
Show answer

Answer: C. As a four-way stop

A traffic signal that is not working must be treated as a four-way STOP sign. Every driver stops, and the first vehicle to arrive goes first.

Handbook: Chapter 2: Non-Functioning Traffic Lights (p. 8)

4. On a two-lane road, the centerline has a solid yellow line on your side and a broken yellow line on the other side. May you pass?
  1. Yes, if the road ahead is clear
  2. No, you may not pass while the solid line is on your side
  3. Yes, but only in daylight
  4. Only if the vehicle ahead is driving below the speed limit
Show answer

Answer: B. No, you may not pass while the solid line is on your side

With a solid and a broken yellow centerline, you may pass only when the broken line is on your side and it is safe. Drivers on the side with the broken line may pass, but you may not.

Handbook: Chapter 2: Pavement Markings (p. 22)

5. You are in the left lane of a one-way street, facing a red light, and want to turn left onto another one-way street. No sign forbids it. What may you do?
  1. Turn left without stopping if no cars are close
  2. Wait for the green light, because left turns on red are never allowed
  3. Turn left on red only from the right lane of the street
  4. Stop, yield to pedestrians and traffic, then turn when it is clear
Show answer

Answer: D. Stop, yield to pedestrians and traffic, then turn when it is clear

Pennsylvania allows a left turn on red only from the left lane of a one-way street onto another one-way street. You must stop and yield first, and no sign may forbid it.

Handbook: Chapter 2: Red, Yellow and Green Traffic Lights and Arrows (p. 7); Chapter 3: Turning Right at a Red Light (p. 46)

6. A steady yellow light comes on as you approach an intersection, and you cannot stop safely before it. What should you do?
  1. Brake as hard as you can to stop before the stop line
  2. Speed up so that you clear it before the light turns red
  3. Continue through the intersection with care
  4. Stop where you are, even if that puts you in the crosswalk
Show answer

Answer: C. Continue through the intersection with care

A steady yellow light warns that red is coming. If you are already in the intersection or cannot stop safely, the manual tells you to continue through carefully.

Handbook: Chapter 2: Red, Yellow and Green Traffic Lights and Arrows (p. 7)

7. What does a steady red X over a traffic lane mean?
  1. You may use that lane only to turn left
  2. Change lanes soon, because the lane direction is about to reverse
  3. You are not allowed to use that lane
  4. You may use the lane if no other traffic is in it
Show answer

Answer: C. You are not allowed to use that lane

A red X closes the lane to you. A steady yellow X is the signal that the lane direction is about to reverse, and a green downward arrow means you may use the lane.

Handbook: Chapter 2: Lane Use Control Signals (p. 8)

8. A double solid yellow centerline marks the middle of a two-way road. What does it mean for passing?
  1. Passing is allowed if the road ahead is clear of traffic
  2. Passing is not allowed for traffic in either direction
  3. Only the lane with the broken line may pass other cars
  4. Passing is allowed in daylight when you can see far ahead
Show answer

Answer: B. Passing is not allowed for traffic in either direction

Two solid yellow lines ban passing for both directions, even where no NO PASSING sign is posted. A broken yellow line on your side is what allows a pass.

Handbook: Chapter 2: Pavement Markings (p. 22)