Pennsylvania permit test: turns and lanes
Start a signal at least 100 feet before a turn if you drive under 35 mph. At 35 mph or faster, start it at least 300 feet before. In a center left-turn lane, signal 3 to 4 seconds before you enter, and enter the lane fully. Make left turns from the lane closest to the centerline and turn into the closest lane. Make right turns from the right lane into the right lane. U-turns need drivers in all directions at least 500 feet away who can see you, and they are banned on curves and near hill crests. You may not pass within 100 feet of an intersection, railroad crossing, bridge, elevated structure, or tunnel, or on a curve or hill crest that limits your view. At 45 mph you need about 1/4 mile of clear road to pass on a two-lane road. You may pass on the right only on roads with two or more marked lanes each way, or when a driver ahead is turning left. Passing in an acceleration lane is illegal.
Handbook: Chapter 3: Turning, Merging and Passing (pp. 44-47)
7 practice questions
- At least 50 feet
- At least 100 feet
- At least 300 feet
- At least 500 feet
Show answer
Answer: C. At least 300 feet
Pennsylvania law requires a turn signal at least 300 feet before the turn when you drive 35 mph or faster. The 100-foot minimum applies only when you drive slower than 35 mph.
Handbook: Chapter 3: Communicating Your Intentions to Other Drivers (p. 44)
- On a curve, if you cannot see any traffic coming
- When drivers in all directions are 500 feet away and can see you
- Near the top of a hill, if you signal first and move fast
- Anywhere that is clear, as long as you turn on your hazard flashers first
Show answer
Answer: B. When drivers in all directions are 500 feet away and can see you
A U-turn is allowed only if it does not endanger other traffic: drivers from all directions must be at least 500 feet away and able to see you clearly. U-turns are never allowed on curves, near the crest of a hill, or where a NO U-TURN sign is posted.
Handbook: Chapter 3: Turning, Merging and Passing, U-Turns (p. 46)
- 100 feet
- 50 feet
- 200 feet
- 500 feet
Show answer
Answer: A. 100 feet
You may not pass within 100 feet of any bridge, elevated structure, or tunnel. The same 100-foot rule applies at intersections and railroad crossings unless an official traffic control device allows passing there.
Handbook: Chapter 3: Passing, You May Not Pass If (p. 47)
- About 1 second before
- About 10 seconds before
- 3 to 4 seconds before
- Only after you are inside the lane
Show answer
Answer: C. 3 to 4 seconds before
Signal 3 to 4 seconds before you enter the center turn lane. Do not enter it too soon, because the longer you drive in it, the more likely a head-on meeting becomes.
Handbook: Chapter 3: Turning From or Into a Center Turn Lane (p. 45)
- About 1/8 mile
- About 1/2 mile
- About 1/4 mile
- About 1/10 mile
Show answer
Answer: C. About 1/4 mile
On a two-lane road you must use the lane of oncoming traffic. At 45 mph the manual says you need about 1/4 mile of clear road to finish the pass.
Handbook: Chapter 3: Passing, On a Two-Lane Road (p. 47)
- On the shoulder of a multi-lane highway
- Within 100 feet of a railroad crossing
- At the top of a hill, if the right lane looks clear
- On a road with 2 or more marked lanes each way
Show answer
Answer: D. On a road with 2 or more marked lanes each way
Passing on the right is allowed on roads with two or more marked lanes each way, or when the driver ahead is turning left and you stay on the berm. You may not pass on a multi-lane shoulder.
Handbook: Chapter 3: Passing, Passing on the Right (p. 47)
- You may pass if you signal before you move over to the left
- You may pass if the car ahead is under the speed limit
- You may pass if the lane is longer than a quarter mile
- It is illegal to pass a vehicle ahead of you in that lane
Show answer
Answer: D. It is illegal to pass a vehicle ahead of you in that lane
The acceleration lane is for reaching the speed of traffic. Passing the vehicle ahead of you there is illegal.
Handbook: Chapter 3: Merging With Traffic (p. 46)