Rhode Island permit test: signals and pavement markings
A steady red light means stop before the crosswalk. Rhode Island allows a right turn on red after a complete stop, if no sign bans it and you yield to pedestrians and traffic. A steady yellow means the red is next, so clear the intersection. A flashing red light is a stop sign: stop and yield to vehicles on your right and left. A flashing yellow light means slow down and proceed with caution. A green arrow gives you a protected turn. A red arrow means you may not go in that direction. A flashing yellow arrow lets you turn only after you yield to oncoming traffic and pedestrians. At an intersection with no signs or signals, treat it as if a yield sign were there. Solid yellow lines separate opposing traffic and forbid passing on that side. A broken yellow line allows passing with care. A solid yellow line next to a broken one means only the driver on the broken-line side may pass. White lines separate same-direction traffic. A shared left-turn lane has solid yellow lines on the outside and broken yellow lines inside. Signal at least 100 feet before a turn.
Handbook: IV Signals and Roadway Markings
8 practice questions
- Slow down and proceed through if nothing is coming
- Treat it as a stop sign and yield to vehicles on your right and left
- Treat the signal as broken and drive on through
- Stop only if other cars are waiting at the cross street
Show answer
Answer: B. Treat it as a stop sign and yield to vehicles on your right and left
A flashing red light works like a stop sign. You must come to a full stop and give way to cross traffic before you go.
Handbook: IV.D Traffic Lights/Signals
- Stop completely and wait for a green light
- Speed up so you clear the intersection quickly
- Slow down, cover the brake and proceed with caution
- Treat it exactly the same as a steady red light
Show answer
Answer: C. Slow down, cover the brake and proceed with caution
A flashing yellow light is a warning. You do not need to stop, but slow down and be ready to react.
Handbook: IV.D Traffic Lights/Signals
- Yield to oncoming traffic and pedestrians
- Stop and wait for a green arrow before you turn
- Turn first because you are the one with the arrow
- Turn only if there is no crosswalk at that corner
Show answer
Answer: A. Yield to oncoming traffic and pedestrians
A flashing yellow arrow lets you turn only after yielding to oncoming traffic, which has a steady green, and to pedestrians.
Handbook: IV.D Traffic Lights/Signals
- Passing is allowed with care
- Do not pass
- The road is one-way
- Passing is allowed only at night
Show answer
Answer: B. Do not pass
Solid yellow lines separate opposing traffic and prohibit passing. A broken yellow line on your side means you may pass with care.
Handbook: IV.B Roadway Markings
- You, because your side has the solid line
- Both drivers, if the road ahead is clear
- Neither driver, because the lines are mixed
- The driver on the side with the broken line
Show answer
Answer: D. The driver on the side with the broken line
Drivers with the broken line on their side may pass with care. Drivers with the solid line on their side must not cross it to pass.
Handbook: IV.B Roadway Markings
- Traffic moving in opposite directions
- Parking lanes from sidewalks only
- Traffic moving in the same direction
- Public roads from private roads
Show answer
Answer: C. Traffic moving in the same direction
White lines separate lanes that carry traffic the same way. Yellow lines separate traffic going in opposite directions.
Handbook: IV.B Roadway Markings
- At least 20 feet
- At least 50 feet
- At least 300 feet
- At least 100 feet
Show answer
Answer: D. At least 100 feet
The manual says a driver must signal at least 100 feet before a turn. It adds that signals should give drivers behind you time to react.
Handbook: IV.A Signals; IX. Laws You Must Know, item 5
- Left arm held up
- Left arm straight out
- Left arm pointing down
- Right arm straight out
Show answer
Answer: A. Left arm held up
From the driver's seat, a right turn is shown with the left hand and arm up. Straight out means left, and down means stop or slow.
Handbook: IV.A Signals