Get the Pass

South Carolina permit test: signals and pavement markings

A steady green light means go if the intersection is clear. A steady yellow light warns that red is coming, so stop if you can. If you are already in the intersection, clear it quickly. A red light means stop behind the stop line, crosswalk or intersection. After a full stop you may turn right on red unless a sign bans it. Stop before the near crosswalk, then yield to pedestrians and other traffic lawfully using the intersection. A flashing yellow light means slow down and proceed with caution. A flashing red light means stop, then proceed as at a stop sign. On horizontal signals the red light is on the left, yellow in the middle and green on the right. Solid yellow lines on both sides of the center mean no passing in either direction. Passing is allowed when a broken yellow line is on your side. White lines separate lanes of traffic going the same way. If a stop line is painted before a crosswalk, obey the stop line first. You must yield to pedestrians entering or in a crosswalk, marked or not.

Handbook: Section 6: Rules of the Road – Traffic Signals and Pavement Markings

7 practice questions

1. You approach a flashing red traffic light. What must you do?
  1. Slow down and go on with caution, without making a complete stop
  2. Stop only if other traffic is present at or near the intersection
  3. Wait where you are until the light stops flashing and shows green
  4. Stop, then proceed as you would at a stop sign when it is safe
Show answer

Answer: D. Stop, then proceed as you would at a stop sign when it is safe

A flashing red light works like a stop sign. You must make a complete stop, look both ways, and yield if required.

Handbook: Section 6: Rules of the Road – Traffic Signals

2. What does a flashing yellow traffic light tell you to do?
  1. Slow down and proceed with caution
  2. Stop and wait for green
  3. Speed up to clear the intersection
  4. Yield only to pedestrians
Show answer

Answer: A. Slow down and proceed with caution

A flashing yellow light is a caution signal. Be ready to stop for traffic entering the intersection.

Handbook: Section 6: Rules of the Road – Traffic Signals

3. A steady yellow light appears as you approach an intersection and you are not yet in it. What should you do?
  1. Speed up and go through before it turns red
  2. Stop and wait for the next green light
  3. Stop only if you see a police officer
  4. Continue at the same speed if no cars are close
Show answer

Answer: B. Stop and wait for the next green light

A yellow light warns that the signal is about to turn red. If you are not already in the intersection, stop. If you are in it, clear it as quickly as you can.

Handbook: Section 6: Rules of the Road – Traffic Signals

4. When may you turn right on a red light in South Carolina?
  1. Only at an intersection where a sign specifically permits a right turn on red
  2. Only after you have waited at least 30 seconds and no vehicle is in sight
  3. After stopping, unless a sign prohibits it, and after yielding to pedestrians and traffic
  4. Never at a signal that has a marked crosswalk on the near side of the turn
Show answer

Answer: C. After stopping, unless a sign prohibits it, and after yielding to pedestrians and traffic

A right turn on red is allowed except where a sign bans it. Stop before the crosswalk, then yield to pedestrians and to traffic lawfully using the intersection.

Handbook: Section 6: Rules of the Road – Traffic Signals

5. What do solid yellow lines on both sides of the center of a two-direction road mean?
  1. Passing is permitted in both directions
  2. Passing is permitted only for slow vehicles
  3. The road has a reversible lane
  4. Passing is prohibited in both directions
Show answer

Answer: D. Passing is prohibited in both directions

Solid yellow lines mean no passing for either direction. A broken yellow line on your side is the one that allows passing.

Handbook: Section 6: Rules of the Road – Pavement Markings

6. On a horizontal traffic signal, where is the green light?
  1. On the right
  2. On the left
  3. In the middle
  4. On the top
Show answer

Answer: A. On the right

On a horizontal signal, red is on the left, yellow is in the middle, and green is on the right. This is the same order as top to bottom on a vertical signal.

Handbook: Section 6: Rules of the Road – Traffic Signals

7. A stop line is painted before a crosswalk. Where must you stop?
  1. In the crosswalk, so you can see traffic
  2. Behind the stop line
  3. After the crosswalk, just before the intersection
  4. Wherever you can see best, ignoring the line
Show answer

Answer: B. Behind the stop line

If there is a stop line before the crosswalk, you must obey the stop line first. Stopping in the crosswalk blocks pedestrians.

Handbook: Section 6: Rules of the Road – Crosswalks and Stop Lines