Get the Pass

South Dakota permit test: signals and pavement markings

A steady red light means stop. You may turn right on red after a full stop if it is safe and no sign forbids it, and you must yield to all traffic and pedestrians. A flashing red light is treated like a stop sign. A steady yellow light means the signal is about to turn red, so stop if it is safe, but continue if you are already in the intersection. A flashing yellow light means slow down and use caution. A green arrow lets you turn in its direction with no oncoming or crossing traffic. A red arrow means you may not go that way. If a signal is dark or red and not working, stop as you would at a stop sign. Pavement markings show where you may pass. A double yellow line prohibits passing in both directions, and a dashed yellow line on your side permits it when safe. Shared center lanes are for left turns from either direction. At crossings, flashing lights mean stop, and you must never drive around a gate.

Handbook: Rules of the Road: Traffic Signals and Pavement Markings

7 practice questions

1. A traffic light is flashing red. What must you do?
  1. Slow down and proceed with caution
  2. Stop only if other cars are coming
  3. Treat it as a yield sign
  4. Stop completely, then go when it is safe
Show answer

Answer: D. Stop completely, then go when it is safe

A flashing red light means the same as a stop sign. You must come to a complete stop and go only when it is safe. A flashing yellow light is the one that means slow down and use caution.

Handbook: Rules of the Road: Traffic Signals - Red

2. The light turns yellow while you are already in the intersection. What should you do?
  1. Keep going through the intersection
  2. Stop where you are
  3. Back up behind the stop line
  4. Speed up and honk
Show answer

Answer: A. Keep going through the intersection

If you are in the intersection when the light turns yellow, you do not stop. You continue through. If you have not entered it yet, you must stop if it is safe to do so.

Handbook: Rules of the Road: Traffic Signals - Yellow

3. A traffic signal is completely dark because the power is out. How must you treat the intersection?
  1. As if you had the green light
  2. As if there were a stop sign
  3. As if you had a yield sign
  4. As if the road ahead were closed
Show answer

Answer: B. As if there were a stop sign

The manual says a vehicle facing a red or completely unlighted signal must stop the same way as at a stop sign. Driving through a dark signal without stopping is a common mistake.

Handbook: Rules of the Road: Traffic Signals - Signal out of operation

4. You want to turn right at a red light and no sign forbids it. What is the correct way to do it?
  1. Slow down and turn right without making a full stop
  2. Turn right only if no cars are in sight in either direction
  3. Stop first, yield to all traffic and pedestrians, then turn when safe
  4. Wait for a green arrow before you make any right turn
Show answer

Answer: C. Stop first, yield to all traffic and pedestrians, then turn when safe

A right turn on red is allowed after a full stop if it is safe and no sign prohibits it. You must yield to all traffic, including pedestrians and bicyclists.

Handbook: Rules of the Road: Traffic Signals - Red

5. What does a double yellow line in the center of a two-way road mean?
  1. Passing is allowed in both directions
  2. Passing is allowed for slow vehicles only
  3. The road is one-way
  4. Passing is not allowed in either direction
Show answer

Answer: D. Passing is not allowed in either direction

A double yellow line means passing is prohibited in both directions. A dashed yellow line on your side is what allows passing.

Handbook: Rules of the Road: Pavement Markings

6. A lane marked by solid and dashed yellow lines on each side with left-turn arrows pointing both ways is called what?
  1. A shared center lane
  2. A passing lane
  3. An express lane
  4. A bicycle lane
Show answer

Answer: A. A shared center lane

A shared center lane is used by drivers from both directions for left turns, or U-turns where they are allowed. Enter it only when it is safe, and do not use it to pass.

Handbook: Rules of the Road: Other Lane Controls

7. The lights at a railroad crossing are flashing. What must you do?
  1. Cross quickly if you do not see a train close to the crossing
  2. Stop and wait, and do not drive around a lowered gate
  3. Stop only if the gate has already lowered across your lane
  4. Slow down and cross as soon as the bell stops ringing
Show answer

Answer: B. Stop and wait, and do not drive around a lowered gate

Flashing lights at a crossing mean you must stop. Never drive around the gate, and do not cross until any bell or horn has stopped.

Handbook: Rules of the Road: Traffic Signs - Railroad Crossing Warning Signs