Get the Pass

Tennessee permit test: signals and pavement markings

A green light means go if the way is clear, and you must still yield to vehicles and pedestrians in the intersection. A steady yellow light means prepare to stop. If you are already in the intersection when it turns yellow, continue through cautiously. A red light means stop behind the line or crosswalk. You may turn right on red after a complete stop unless a sign forbids it. A flashing red light is treated as a stop sign. A flashing yellow arrow allows a left turn after you yield. If a signal is not working, treat the intersection as an all-way stop. A yellow line to the left of your lane separates traffic going the other way. Two solid yellow lines mean no passing from either direction. If the solid yellow line is on your side, you may not pass. If the broken line is on your side, you may pass when it is safe. Broken white lines separate lanes with traffic in the same direction. A solid white line means stay in your lane. White is on your right and yellow is on your left. If this is reversed, you are going the wrong way.

Handbook: Section B-3: Traffic Signs and Signals - Traffic Signals and Pavement Markings

7 practice questions

1. The light turns yellow while you are already inside the intersection. What should you do?
  1. Stop where you are, even in the middle of it
  2. Continue cautiously through the intersection
  3. Back up behind the stop line right away
  4. Speed up and sound your horn as a warning
Show answer

Answer: B. Continue cautiously through the intersection

If you are already in the intersection when the light turns yellow, you do not stop. You continue cautiously through it. If you are still before the intersection, you must stop if it is safe to do so.

Handbook: Section B-3: Traffic Signs and Signals - Traffic Signals

2. A traffic signal is dark at an intersection because the power is out. What does Tennessee law require?
  1. Treat it as a yield, because no signal is working
  2. Treat the intersection as an all-way stop
  3. Drive through if you are on the larger road
  4. Drive through if you honk your horn first
Show answer

Answer: B. Treat the intersection as an all-way stop

Tennessee law says an intersection with a signal that is not working is treated as an all-way stop. Stop as if there were stop signs in all directions, and go only when it is safe.

Handbook: Section B-3: Traffic Signs and Signals - Traffic Signals

3. You approach a flashing red traffic light. What must you do?
  1. Slow down and go through if no one is coming
  2. Stop only if you plan to make a turn at the light
  3. Stop only if other cars are already waiting there
  4. Come to a complete stop, as at a STOP sign
Show answer

Answer: D. Come to a complete stop, as at a STOP sign

A flashing red light requires a complete stop, just like a stop sign. After you stop, you follow the normal right-of-way rules before you go.

Handbook: Section B-3: Traffic Signs and Signals - Traffic Signals

4. You face a flashing yellow arrow that points left. What may you do?
  1. Turn left first, because oncoming traffic must wait for you
  2. Turn left after you yield to oncoming traffic and pedestrians
  3. Go straight only, because the arrow is a warning
  4. Wait for a green arrow, because a left turn is not allowed now
Show answer

Answer: B. Turn left after you yield to oncoming traffic and pedestrians

A flashing yellow arrow is a permissive arrow. You may turn in its direction, but you must yield and wait for a safe gap in oncoming traffic.

Handbook: Section B-3: Traffic Signs and Signals - Traffic Signals

5. Two solid yellow lines separate the lanes of the road. What does this mean?
  1. You may not cross them to pass, from either direction
  2. You may cross them to pass when no car is coming
  3. Only the driver on the right may pass
  4. Traffic on both sides must move in the same direction
Show answer

Answer: A. You may not cross them to pass, from either direction

Two solid yellow lines mean that you may not cross them from either direction, even if no oncoming car is in view. You may cross a solid yellow line to turn into a driveway or side road if it is safe.

Handbook: Section B-3: Traffic Signs and Signals - Pavement Markings

6. The center of a two-way road has a solid yellow line on your side and a broken yellow line on the other side. What does this mean for you?
  1. You may pass if the road ahead is clear
  2. You may pass only on a hill
  3. You may not pass
  4. You may only turn right
Show answer

Answer: C. You may not pass

When there is a solid yellow line on your side, you may not pass, even though the other driver may. If the broken line is on your side, you are in a passing zone.

Handbook: Section B-3: Traffic Signs and Signals - Pavement Markings

7. You see a yellow line to your right and a white line to your left. What does this tell you?
  1. You are in the correct lane of a divided highway
  2. You are driving the wrong way
  3. You are in a passing lane
  4. You are on a one-way street
Show answer

Answer: B. You are driving the wrong way

Remember: white on your right and yellow on your left. If the colors are the other way around, you are going the wrong way and must pull over and get out of the roadway.

Handbook: Section B-3: Traffic Signs and Signals - Pavement Markings