Vermont permit test: signals and pavement markings
At a red light, stop before the stop line or crosswalk, whichever comes first. A right turn on a circular red is usually allowed, but only after a full stop and after you yield to pedestrians and vehicles. Never turn right on a red arrow, and obey signs that prohibit the turn. A yellow light warns that red is coming. A flashing red light works like a stop sign. A flashing yellow light means slow down, scan the intersection and proceed with caution. If a signal is dark, stop as if there were stop signs in all directions. For left-turn arrows, a solid red arrow means stop and wait. A solid yellow arrow means the signal is about to turn red. A flashing yellow arrow lets you turn after you yield to oncoming traffic and pedestrians. A solid green arrow gives left turns the right-of-way. On the road, yellow center lines divide opposing traffic, and broken white lines divide lanes that go the same way. A continuous two-way left-turn lane is not a travel lane. On a divided highway, a yellow edge line on your right means you are going the wrong way.
Handbook: Chapter 7: Traffic Lights; Highway Markings
7 practice questions
- Stop and wait, and do not enter the intersection to turn
- Turn left if the way is clear of oncoming traffic
- Turn left after yielding to pedestrians in the crosswalk
- Go straight only if you are in the left lane
Show answer
Answer: A. Stop and wait, and do not enter the intersection to turn
A solid red arrow means drivers who want to turn in that direction must stop and wait. Do not enter the intersection to make that turn while the red arrow is lit.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights: Arrows
- Slow down and go through if no one else is coming
- Treat it like a flashing yellow light
- Go through at normal speed, because the road has priority
- Stop as if there were stop signs in all directions
Show answer
Answer: D. Stop as if there were stop signs in all directions
If a signal light is dark, stop as if there are stop signs in all directions. Then follow the usual four-way stop rules for who goes first.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights
- Stop and wait until the light stops flashing and turns to solid green
- Speed up to get through before the light turns red and traffic stops
- You have the right-of-way over all other traffic at the intersection
- Slow down, scan the intersection and proceed with caution
Show answer
Answer: D. Slow down, scan the intersection and proceed with caution
A flashing yellow light tells you to slow down, scan the intersection, and yield to oncoming vehicles before you turn left. Then you may proceed with caution.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights
- Slow down and proceed with caution without stopping
- Stop, then proceed after yielding to everyone
- The light is about to turn green, so be ready to go
- Stop and wait until the light turns solid green
Show answer
Answer: B. Stop, then proceed after yielding to everyone
A flashing red light works like a stop sign. Stop, then go only after you yield the right-of-way to all pedestrians, bicyclists and vehicles.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights
- You are going the wrong way
- The shoulder is reserved for emergency vehicles only
- You are in a lane that ends soon
- Passing on the right is allowed in this section
Show answer
Answer: A. You are going the wrong way
On a divided highway the line to your right should be white. A yellow line on your right means you are going the wrong way on a divided highway or Interstate.
Handbook: Chapter 7: How to Drive Safely - Interstate Driving
- Never, because a red light always means you must wait for the green light
- Any time, without stopping, if you can see that no cars are coming
- Only when the light has been red for more than 30 seconds and you signal
- After a full stop, if no sign prohibits it and you yield to pedestrians and vehicles
Show answer
Answer: D. After a full stop, if no sign prohibits it and you yield to pedestrians and vehicles
Right turns at circular red lights are usually allowed, but only after you stop completely, scan the intersection and yield. Some intersections have signs or lit symbols that prohibit the turn.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights
- Left turns have the right-of-way and oncoming traffic must stop
- Turn left only after yielding to oncoming traffic and pedestrians
- Stop and wait until the arrow turns solid green
- The left turn is prohibited at this time
Show answer
Answer: B. Turn left only after yielding to oncoming traffic and pedestrians
With a flashing yellow arrow you may turn left after you yield to all oncoming traffic and to pedestrians in the crosswalk. Oncoming traffic has a green light, so wait for a safe gap.
Handbook: Chapter 7: How to Drive Safely - Traffic Lights: Arrows