Get the Pass

Vermont permit test: turns and lanes

Vermont law requires a turn signal at least 100 feet before a turn or lane change. Signaling three to five seconds ahead meets this rule. For a left turn, get into the left lane well ahead of time and position your vehicle within one foot of the center line if it is safe. Keep the wheels straight until you turn so that a hit from behind will not push you into oncoming traffic. Yield to oncoming vehicles, bicyclists and pedestrians. For a right turn, stay about three feet from the right side of the road and do not swing left first. Turn into the nearest lane. When you turn onto a road with several lanes, right turns go into the right lane and left turns go into the left lane. Stay in your lane until the turn is complete, and obey arrows and lane signs. Pass on the left, leave at least four feet from the vehicle or bicycle you pass, and return to the right lane when you can see the whole front of it in your mirror. Do not pass on hills, curves, railroad crossings or intersections. In a roundabout, do not change lanes.

Handbook: Chapter 7: Signals; Left Turns; Right Turns; Passing; Highway Markings

7 practice questions

1. As you approach a left turn, where should your vehicle be if it is safe?
  1. Within one foot of the center line, with the wheels kept straight until you turn
  2. Near the right edge of the lane, to leave more room for other drivers
  3. Straddling the center line with the wheels already turned to the left
  4. Three feet from the center line with the front wheels turned left
Show answer

Answer: A. Within one foot of the center line, with the wheels kept straight until you turn

Position your vehicle within one foot of the center line and keep the wheels straight. If someone hits you from behind, straight wheels will not push you into oncoming traffic.

Handbook: Chapter 7: How to Drive Safely - Left Turns

2. You turn left onto a road with several lanes in your direction and no lane signs. Which lane do you turn into?
  1. The far right lane, to get ready for the next turn
  2. The nearest lane, which is the left lane
  3. The center lane, so you can go either way
  4. Any lane that has the fewest cars in it
Show answer

Answer: B. The nearest lane, which is the left lane

When you turn left from one road onto a multiple-lane road, turn into the left lane first. Turn into the nearest lane, then move over after the turn is complete.

Handbook: Chapter 7: How to Drive Safely - Highway Markings (lane use control)

3. You are in a lane marked with a straight arrow and you realize you want to turn. What should you do?
  1. Turn from the straight-arrow lane as long as you use your signal first
  2. Cut across the lanes next to you, signal, and then make the turn
  3. Go straight and find another route, such as going around the block
  4. Stop in the lane and wait for traffic to clear so you can turn
Show answer

Answer: C. Go straight and find another route, such as going around the block

You must follow the direction shown for your lane. A sudden lane change at the intersection increases crash risk, so go around the block instead.

Handbook: Chapter 7: How to Drive Safely - Highway Markings (lane use control)

4. You are about to make a right turn. Which position is correct as you approach the turn?
  1. In the center of the road, and then cut sharply right into the turn
  2. Swing wide to the left first, then turn into the right lane
  3. On the shoulder, so you stay out of the traffic lane until the turn
  4. About three feet from the right side of the road, without swinging left first
Show answer

Answer: D. About three feet from the right side of the road, without swinging left first

Approach a right turn about three feet from the right side of the road. Do not swing your vehicle to the left before turning right.

Handbook: Chapter 7: How to Drive Safely - Right Turns

5. How far before a turn or lane change does Vermont law require you to signal?
  1. At least 100 feet
  2. At least 25 feet
  3. At least 50 feet
  4. At least 500 feet
Show answer

Answer: A. At least 100 feet

A driver must use a turn signal not less than 100 feet before turning or changing lanes. Signaling three to five seconds ahead meets this rule.

Handbook: Chapter 7: How to Drive Safely - Signals

6. Your turn signals do not work. What must you do?
  1. Tap your brakes and make the turn without any other signal
  2. Honk your horn twice before each turn
  3. Use hand signals, and fix the lights right away
  4. Drive only on roads with no turns until you can repair them
Show answer

Answer: C. Use hand signals, and fix the lights right away

If directional lights or brake lights are not working, you must use hand signals to show you are going to stop or turn. Broken lights must be repaired immediately.

Handbook: Chapter 7: How to Drive Safely - Signals

7. Where is it illegal to pass another vehicle?
  1. On a straight road with no oncoming traffic
  2. At a railroad crossing
  3. On a multilane road, on the left
  4. On a road with a broken line in your lane
Show answer

Answer: B. At a railroad crossing

The handbook lists hills, curves, railroads and intersections as places where you must not pass. It is also against the law to pass another vehicle at a railroad crossing.

Handbook: Chapter 7: How to Drive Safely - Passing; Rules of the Road at Railroad Crossings