Get the Pass

Oregon permit test: road signs

Sign color and shape tell you what a sign means. Red signs prohibit: the octagon is STOP, the triangle is YIELD, and the square is DO NOT ENTER. At a stop sign you must stop completely and stay stopped for pedestrians in marked or unmarked crosswalks. Regulatory signs are white rectangles with black words or symbols, such as speed limit, one way, keep right, and no turn on red. Yellow signs warn of hazards: curves, merges, a stop or signal ahead, a roundabout, a railroad crossing, deer, and slippery pavement. A lane reduction sign means your lane ends and you must merge. An add-lane sign means you do not need to merge. Green signs give exits and directions, and the exit number helps you pick the right exit. Brown signs point to historic, cultural and recreation areas. Blue signs show services such as gas, food, lodging and rest areas. In a safety corridor, turn on your lights. Always obey a police officer or road worker who directs traffic over any sign.

Handbook: Signs & Traffic Signals

7 practice questions

1. You approach an octagonal red sign with no other traffic in sight. What must you do, and what else must you yield to?
  1. Stop completely, and yield to pedestrians in marked or unmarked crosswalks
  2. Stop only if a pedestrian is standing at the curb ahead
  3. Slow down and roll through if the road is clear of cars
  4. Stop only if another vehicle or a pedestrian is approaching the intersection
Show answer

Answer: A. Stop completely, and yield to pedestrians in marked or unmarked crosswalks

An octagon always means a complete stop. You must also stop and stay stopped for pedestrians in marked or unmarked crosswalks before you enter the intersection.

Handbook: Signs & Traffic Signals – Signs (p. 7)

2. What does a triangular red-and-white sign pointing down tell you to do?
  1. Slow to 25 mph for the next block
  2. Reduce speed and yield right of way, stopping if needed
  3. Always come to a full stop before the sign, even with no traffic
  4. Merge into the lane on your right at once
Show answer

Answer: B. Reduce speed and yield right of way, stopping if needed

A yield sign means slow down and give the right of way. You stop only when traffic or pedestrians require it, the same as you would for a stop sign.

Handbook: Signs & Traffic Signals – Signs (p. 7)

3. A diamond-shaped sign with a yellow background most likely does what?
  1. Shows the direction to a nearby park or lake
  2. Points out a rest area or gas station at the next exit
  3. Warns you of a hazard or change in road conditions ahead
  4. Tells you the maximum legal speed on that stretch of road
Show answer

Answer: C. Warns you of a hazard or change in road conditions ahead

Warning signs are yellow and alert you to known hazards or changes in the road. Speed limits are white, and service signs are blue.

Handbook: Signs & Traffic Signals – Warning Signs (p. 10)

4. On an Oregon highway you see a green sign with an exit number. What does the number help you do?
  1. Find out the route number of the cross road
  2. Know the speed limit on the exit ramp
  3. Count how many miles remain on the highway
  4. Know which exit to take
Show answer

Answer: D. Know which exit to take

Green guide signs give exit and direction information. The number on an exit sign helps you identify the exit you want.

Handbook: Signs & Traffic Signals – Route, Guide, and Information Signs (p. 13)

5. You enter a stretch of highway marked with a Safety Corridor sign. What does Oregon recommend?
  1. Turn on your headlights for safety
  2. Drive at least 10 mph under the limit
  3. Pull onto the shoulder to let traffic pass
  4. Use your hazard lights the whole way
Show answer

Answer: A. Turn on your headlights for safety

A safety corridor has more fatal and serious injury collisions than the state average. The manual tells drivers to turn on their lights for safety there.

Handbook: Signs & Traffic Signals – Safety Corridors (p. 13)

6. You see a blue sign showing a fork, a bed and a gas pump. What kind of sign is it?
  1. A warning sign that alerts you to a hazard at the next exit ahead of you
  2. A motorist service sign for food, gas and lodging at the next exit
  3. A route sign for a state highway
  4. A regulatory sign for a no-parking zone
Show answer

Answer: B. A motorist service sign for food, gas and lodging at the next exit

Blue signs tell you about services such as gas, food, lodging, rest areas and hospitals. They do not regulate your driving.

Handbook: Signs & Traffic Signals – Motorist Service Signs (p. 14)

7. A lane-reduction sign shows the right lane ending. If you are in that lane, what should you do?
  1. Speed up and stay in the ending lane as long as possible
  2. Drive onto the shoulder to continue
  3. Merge into the through lane when it is safe
  4. Stop and wait for traffic to let you in
Show answer

Answer: C. Merge into the through lane when it is safe

A lane reduction sign means the lane ends soon, and vehicles in it must merge into the through lane. Use your signal and merge when you can do so safely.

Handbook: Signs & Traffic Signals – Warning Signs: Lane Reduction (p. 11)