Get the Pass

South Carolina permit test: turns and lanes

When you turn, search all corners, signal, and enter the lane closest to the direction of your turn. Turn right from the right-most part of your lane and do not swing wide to the left. Turn left from the left-most part of your lane after you yield to oncoming traffic. State law requires you to signal 100 feet or more before you change lanes, turn or merge. Before a lane change, check your mirrors and look over your shoulder to check the blind spot. On a multi-lane road, the left-most lane is for passing slower vehicles. Never pass on the shoulder. Do not pass when oncoming traffic is near, when a curve or hill blocks your view, at intersections, or before a railroad crossing or bridge. Signal your pass, return to your lane only when the whole front of the passed vehicle shows in your rearview mirror, and slow down when you pass a bicyclist. Use a three-point turnabout only on a quiet two-lane road too narrow for a U-turn. When a lane ends and traffic is backed up, the zipper merge is a best practice but not a legal requirement.

Handbook: Section 7: General Driving – Turning, Passing and Merging

9 practice questions

1. Where in your lane should you start a right turn?
  1. From the right-most portion of your lane
  2. From the center of your lane
  3. By swinging wide to the left first
  4. From the left-most portion of your lane
Show answer

Answer: A. From the right-most portion of your lane

Turn right from the right-most part of your lane. Swinging wide to the left can put you in the path of other traffic.

Handbook: Section 7: General Driving – Turning and Turnabouts

2. Where in your lane should you start a left turn?
  1. From the right-most portion of your lane
  2. From the left-most portion of your lane
  3. From the center of the intersection
  4. From any lane that is open
Show answer

Answer: B. From the left-most portion of your lane

Always turn left from the left-most part of your lane, after yielding to oncoming traffic.

Handbook: Section 7: General Driving – Turning and Turnabouts

3. How far before a turn or lane change must you signal under South Carolina law?
  1. 25 feet
  2. 50 feet
  3. 100 feet or more
  4. 300 feet
Show answer

Answer: C. 100 feet or more

State law requires a turn signal 100 feet or more before changing lanes, turning, or merging into traffic. Cancel the signal when the move is done.

Handbook: Section 8: Safe Driving Tips – Signaling Your Movements

4. When can you move back into your lane after passing another vehicle?
  1. As soon as your front bumper has passed the rear bumper of the other vehicle
  2. After the rear of your vehicle is even with the driver's door of the other one
  3. Once the driver of the passed vehicle flashes the headlights to say it is fine
  4. When the complete front of the passed vehicle is visible in your rearview mirror
Show answer

Answer: D. When the complete front of the passed vehicle is visible in your rearview mirror

Keep passing until you can see the whole front of the passed vehicle in your rearview mirror. Then signal and return smoothly.

Handbook: Section 7: General Driving – Passing

5. May you pass another vehicle on the shoulder of the road?
  1. No, never, whether the shoulder is paved or not
  2. Yes, if the shoulder is paved
  3. Yes, if the other driver is going slowly
  4. Yes, but only on the right side at night
Show answer

Answer: A. No, never, whether the shoulder is paved or not

The shoulder is for emergency stopping, not for through traffic. Never pass on it.

Handbook: Section 7: General Driving – Passing

6. Which situation is a place where you should not try to pass?
  1. On a straight two-lane road with no traffic in sight
  2. Where a curve or hill blocks your view
  3. On a multi-lane road where you are in the left lane
  4. On a one-way street with clear lanes
Show answer

Answer: B. Where a curve or hill blocks your view

Do not pass when a curve or hill blocks your view, when oncoming traffic is near, at intersections, or before a railroad crossing or bridge.

Handbook: Section 7: General Driving – Passing

7. On a multi-lane road, which lane is for passing slower vehicles?
  1. The right-most lane
  2. The center lane only
  3. The left-most lane
  4. The shoulder
Show answer

Answer: C. The left-most lane

The manual says the left-most lane is for passing slower vehicles on multi-lane roads.

Handbook: Section 7: General Driving – Passing

8. When should you use a three-point turnabout?
  1. Whenever you miss your turn, even when the street is busy with traffic
  2. On any multi-lane highway where you are in the far left lane of travel
  3. Whenever a side street or driveway is not available close to your position
  4. When the road is too narrow for a U-turn and you cannot go around the block
Show answer

Answer: D. When the road is too narrow for a U-turn and you cannot go around the block

Use it only on a quiet two-lane road that is too narrow for a U-turn. On a busy street it is better to circle the block.

Handbook: Section 7: General Driving – Turning and Turnabouts

9. A sign says a lane is closed ahead and traffic is backed up. What does the manual recommend?
  1. Stay in your lane until the merge point, then take turns merging
  2. Move into the open lane as early as you can
  3. Drive on the shoulder to reach the merge point
  4. Stop in your lane and wait for the other lane to clear
Show answer

Answer: A. Stay in your lane until the merge point, then take turns merging

This is the zipper merge. Using both lanes until the merge point reduces backups. The law does not require it, but it is a best practice in congested work zones.

Handbook: Section 7: General Driving – Zipper Merge (Late Merge)